
Slimline Voltage Controlled Switch - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

HDMI MITM device aimed at supplying crafted EDID to make Apple sources behave
Apple peeler pcb is an open-source printed circuit board by SIGPLAN-AV, from the SIGPLAN-AV/apple-peeler repository on GitHub. It is a 4-layer board of 67 × 83 mm with 138 parts on 106 nets, routed with 1,292 tracks and 311 vias.
It is built around the RP2040, TPS562242DRL and W25Q16JVSSIQ, with the CD4066BM/TR, TS-1187A-B-A-B and 1N4148WS among its other parts. Its parts include 64 resistors, 30 capacitors, 18 transistors, 7 diodes and 6 connectors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R1, R3, R10, R11, R12, R13, R16, R19, R22, R25, R28, R31, R38, R44, R47, R50 +6 |
| 16 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q15, Q17, Q18 |
| 15 | 510Ω | Resistor_SMD:R_0805_2012Metric | R5, R14, R17, R20, R23, R26, R29, R32, R45, R48, R51, R53, R56, R58, R62 |
| 14 | 470kΩ | Resistor_SMD:R_0805_2012Metric | R15, R18, R21, R24, R27, R30, R33, R46, R49, R52, R54, R57, R59, R63 |
| 12 | 2.2μF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C12, C15, C16, C17, C18, C20, C22, C24, C26, C28 |
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric | C8, C13, C14, C19, C21, C23, C25, C27, C29 |
| 5 | 22μF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C9, C10, C11 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 1kΩ | Resistor_SMD:R_0805_2012Metric | R2, R4, R43 |
| 3 | SPST BTN | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2, SW3 |
| 2 | 100pF | Capacitor_SMD:C_0805_2012Metric | C5, C30 |
| 2 | 15pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1N4148WS | Diode_SMD:D_SOD-323 | D1, D7 |
| 2 | 27kΩ | Resistor_SMD:R_0805_2012Metric | R34, R60 |
| 2 | 27Ω | Resistor_SMD:R_0805_2012Metric | R41, R42 |
| 2 | 47kΩ | Resistor_SMD:R_0805_2012Metric | R35, R61 |
| 2 | 5.1kΩ | Resistor_SMD:R_0805_2012Metric | R39, R40 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q14, Q16 |
| 2 | HDMI-001 19PCBTP | Connector_Video:HDMI_A_Molex_208658-1001_Horizontal | J2, J5 |
| 2 | Header_01x06 | conn:PinHeader_1x06_P2.54mm_Vertical | J3, J4 |
| 2 | SK6812MINI-HS | leds:LED_SK6812MINI_HS_012 | D5, D6 |
| 2 | SS14 | Diode_SMD:D_SMA | D2, D3 |
| 1 | 1.5kΩ | Resistor_SMD:R_0805_2012Metric | R36 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2.2μH | Inductor_SMD:L_Sunlord_SWPA5020S | L1 |
| 1 | 30kΩ | Resistor_SMD:R_0805_2012Metric | R37 |
| 1 | 4066 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U3 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | Header_2x03 | conn:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | TPS562242 | Package_TO_SOT_SMD:SOT-563 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J6 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U1 |

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules


Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)

chrkir/hcv
Local Viessmann E3 CAN-bus to MQTT bridge for Vitocal heat pumps. Features Home Assistant Auto-Discovery, ESP32 firmware, and Open Hardware.




mitra42/frugal-iot-hw-sensor
A simple, un-opinionated, multi-purpose sensor board, that can be wired to sensors using most common interfaces (I2C, ModBus, OneWire, Analog) with onboard charging and external antenna.
It measures 67 × 83 mm and has 4 copper layers, 1.6 mm thick.
138 parts, built around the RP2040, TPS562242DRL, W25Q16JVSSIQ and CD4066BM/TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SIGPLAN-AV/apple-peeler repository on GitHub, at the commit this page was made from: the board is apple_peeler_pcb/apple_peeler_pcb.kicad_pcb and its schematic apple_peeler_pcb/apple_peeler_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SIGPLAN-AV before reusing the design.