Skip to the content
2 layers105.1 × 86.4 mmSpotifyDevice, the printed circuit board in 3D
Size
105.1 × 86.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
56
Pads
122
Tracks, vias
78, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 May 2025
Updated
30 Jun 2026

Overview

SpotifyDevice is an open-source printed circuit board by Siddarth-Kota, from the Siddarth-Kota/PCB-Projects repository on GitHub. It is a 2-layer board of 105.1 × 86.4 mm with 20 parts on 56 nets, routed with 78 tracks and 0 vias.

It is built around the ESP32-S3-DEVKITC-1-N8 and B3F-4055. Its parts include 6 resistors, 6 diodes, 5 switches, 2 ICs and 1 capacitor. It belongs with the ESP32 boards of this library.

Main components

2

Parts

20
QtyValueFootprintReferences
5100ΩResistor_SMD:R_0603_1608MetricR2, R3, R4, R5, R6
5B3F-4055ImportedParts:SW_B3F-4055S1, S2, S3, S4, S5
5WHITEImportedParts:IN-S63BT5UWD2, D3, D4, D5, D6
10.1µFCapacitor_SMD:C_0603_1608MetricC1
13.5" SPI TFT DisplayImportedParts:3.5_ SPI TFT DisplayU2
1330ΩResistor_SMD:R_0603_1608MetricR1
1ESP32-S3-DevKitCEspressif:ESP32-S3-DevKitC-1-N16R8U1
1REDImportedParts:151031SS06000D1

More from Siddarth-Kota/PCB-Projects

2
  • 2 layers94.3 × 66 mmLab Sensor, the printed circuit board in 3D

    Lab Sensor

    Siddarth-Kota/PCB-Projects

    31 parts
  • 2 layers83 × 90.2 mmOPAmp PCB, the printed circuit board in 3D

    OPAmp PCB

    Siddarth-Kota/PCB-Projects

    30 parts

Similar boards

  • 4 layers43 × 89 mmReflowControllerV2, the printed circuit board in 3D

    ReflowControllerV2

    walclu/smartReflow

    Repository for STM32WB55 based reflow toaster oven controller.

    99 parts15
  • 2 layers137.2 × 83.8 mmPWA REV2, the printed circuit board in 3D

    PWA REV2

    PubInv/krake

    The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.

    215 parts9AGPL-3.0
  • 2 layers137.2 × 83.8 mmGeneralPurposeAlarmDevicePCB, the printed circuit board in 3D

    GeneralPurposeAlarmDevicePCB

    PubInv/general-purpose-alarm-device

    A general purpose alarm device (with software) as a module for medical devices (and others)

    140 parts7AGPL-3.0
  • 2 layers100.1 × 121.4 mmPanel, the printed circuit board in 3D

    Panel

    da-penguin-guy/Proteus

    The Proteus is a modular collection of PCBs that will be used to develop the Virgil sound Protocol

    137 parts3
  • 2 layers189.2 × 146.7 mmMFD pcb, the printed circuit board in 3D

    MFD pcb

    Apates-MFD/MFD-pcb

    kicad project and components information of pcb

    29 parts2MIT
  • 4 layers90 × 60 mmBench psu, the printed circuit board in 3D

    Bench psu

    PaulBichl/VibePCB-bench-psu

    USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16.6 V / 3 A each, constant voltage / constant current, designed with VibePCB.

    206 parts1
  • 2 layers85 × 120 mmHome Assistant Control pad, the printed circuit board in 3D

    Home Assistant Control pad

    Pegoku/Home-Assistant-Control-pad

    This is a programmable Home Assistant Control Pad. It can control 4 Home assistant devices at a time, and has 4 togglable screens/zones (in total 16 devices).

    111 parts1GPL-3.0
  • 2 layers94 × 94.5 mmAll in one, the printed circuit board in 3D

    All in one

    anh-phi-dao/DATN_Nhung_Firmware_Raspberrypi

    abovecam=VisionESP32("http://192.168.137.235/capture","stockv19.pt","oosv12.pt",0.75,0.6,"Shelf1,22 detection","Shelf1,22 outofstock")…

    19 parts

Questions

How big is the SpotifyDevice PCB?

It measures 105.1 × 86.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SpotifyDevice use?

20 parts, built around the ESP32-S3-DEVKITC-1-N8 and B3F-4055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SpotifyDevice KiCad files?

From the Siddarth-Kota/PCB-Projects repository on GitHub, at the commit this page was made from: the board is SpotifyDevice/SpotifyDevice.kicad_pcb and its schematic Keyboard/Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SpotifyDevice design in my own project?

Its repository states no licence, so its author keeps all rights: ask Siddarth-Kota before reusing the design.