Skip to the content
2 layers75.5 × 67.5 mmDigiclo, the printed circuit board in 3D

Digital Clock with Date, Day, Temperature and Alarm System using NodeMCU ESP8266

Size
75.5 × 67.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
21
Pads
44
Tracks, vias
75, 4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Jun 2026
Updated
24 Jun 2026

Overview

Digiclo is an open-source printed circuit board by shrsauryam-spec, from the shrsauryam-spec/digiclo repository on GitHub, published under the MIT licence. It is a 2-layer board of 75.5 × 67.5 mm with 11 parts on 21 nets, routed with 75 tracks and 4 vias.

It is built around the WEMOS D1 MINI. Its parts include 3 connectors, 2 ICs, 1 capacitor and 1 resistor. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.

Main components

1

README

README.md

DigiClo

image

A Digital Clock with Date, Day, Temperature, and Alarm System using NodeMCU ESP8266

Why?

I do not usually use my phone, so the only way for me to know the time is with a clock or a watch. And I do not wear a watch. At the same time, I do not have a watch in my room, so I created this Digital Clock to help me find out the current time. Another thing is I have a habit of forgetting the date and the day, which isn't really great. So, this clock can help me stay up-to-date.

Key Features:

  1. Wemos D1 Mini ESP8266 as NodeMCU (WiFi Connectivity)
  2. Date, Time, Day, and Temperature Display on a 1.8-inch TFT Display
  3. Alarm System using a Buzzer
  4. Pomodoro Timer with a Potentiometer
  5. Battery Charging with TP4056 Charging Module with Protection

Electrical Components Required:

  1. Wemos D1 Mini ESP8266
  2. TFT LCD Display - 1.8" inch
  3. LiPo Rechargeable Battery 2000 mAh 3.7V
  4. TP4056 Charging Module with Protection

You can find the public 3d document of OnShape below:

https://cad.onshape.com/documents/623138c9b77e6759b0f10c27/w/bd2dd186e4136b7dcbcb23ae/e/b7a90ecbf7c3d132e3466b38

PCB

Designed in KiCad. The PCB design is simple and has zero errors.

Schematics

image

PCB Design

image

PCB Front

image

PCB Back

image

Credits

Thanks to Hack Club for providing this amazing platform. Some Software We Used:

  1. KiCad - PCB Design
  2. Onshape - 3d Modeling
  3. GitHub - Hosting Service

License

MIT

Parts

11
QtyValueFootprintReferences
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3, J4
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
122Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1358footprints:MODULE_358U2
1Conn_01x02_PinConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ1
1WEMOS_D1_miniRF_Module:WEMOS_D1_mini_lightU1

The 7 most common of 11 parts.

Similar boards

  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers32.1 × 40.8 mmPower Monitor Version 1, the printed circuit board in 3D

    Power Monitor Version 1

    alcar21/WemosEM

    Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

    8 parts122
  • 2 layers91 × 49 mmWled, the printed circuit board in 3D

    Wled

    wladwnt/wled

    Simple WLED Board (SW: https://github.com/Aircoookie/WLED)

    9 parts102
  • 2 layers97.5 × 59.3 mmControl Board, the printed circuit board in 3D

    Control Board

    kholia/Easy-Digital-Beacons-v1

    A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

    17 parts89
  • 2 layers64.6 × 36.9 mmNavien latest, the printed circuit board in 3D

    Navien latest

    htumanyan/navien

    Navien water heater wire protocol for communication with NaviLink and other attached devices

    30 parts65
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layersTcsmonitor pcb, the printed circuit board in 3D

    Tcsmonitor pcb

    Syralist/tcs-monitor

    ein Bus-Monitor für TCS Klingelanlagen

    14 parts37MIT

Questions

How big is the Digiclo PCB?

It measures 75.5 × 67.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Digiclo use?

11 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Digiclo KiCad files?

From the shrsauryam-spec/digiclo repository on GitHub, at the commit this page was made from: the board is pcb/digiclo.kicad_pcb and its schematic pcb/digiclo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Digiclo design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).