Skip to the content
2 layers36.5 × 46 mm123-pcb design, the printed circuit board in 3D

This repo contains all the code, hardware notes, and documentation for our Smart Pitcher Base project. The system is made up of three pieces:

Size
36.5 × 46 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
62
Pads
142
Tracks, vias
83, 2
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Feb 2026
Updated
9 Jun 2026

Overview

123-pcb design is an open-source printed circuit board by ShriyanGote, from the ShriyanGote/cse123a-project repository on GitHub. It is a 2-layer board of 36.5 × 46 mm with 22 parts on 62 nets, routed with 83 tracks and 2 vias.

It is built around the ESP32-C3-MINI-1, MCP73871EV and HX711. Its parts include 9 capacitors, 6 resistors, 3 ICs, 3 connectors and 1 inductor. It belongs with the ESP32 and RISC-V boards of this library.

Main components

3

README

README.md

123a-project: Smart Pitcher Base

This repo contains all the code, hardware notes, and documentation for our Smart Pitcher Base project. The system is made up of three pieces:

  1. ESP32C3 firmware — reads the load cell (HX711) on the pitcher base and POSTs readings to the web server.
  2. Web server / dashboard — a Vite + React app (deployed on Vercel) that ingests readings into Supabase. Account sign-in and a setup guide live at https://cse123a-project-6a3s.vercel.app/.
  3. Mobile app — an Expo / React Native app that talks to the web server, displays the water level, and receives low-water push notifications.

Everything lives under Code/. Each sub-project has its own README with run instructions.

text
Code/
├── ESP32/         # firmware (ESP-IDF)
├── web-server/    # Vite + React dashboard + Vercel API routes
├── mobile-app/    # Expo / React Native app
└── 3D Designs/    # printable parts for the base

Other things in this repo

Parts

22
QtyValueFootprintReferences
30.1μFCapacitor_SMD:C_0402_1005MetricC1, C3, C4
34.7μFCapacitor_SMD:C_0603_1608MetricC5, C6, C7
2100Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR3, R4
210μFCapacitor_SMD:C_0603_1608MetricC8, C9
220kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1, R2
2JST 1x02Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_HorizontalJ1, J2
1100KResistor_SMD:R_0402_1005MetricR6
1100kResistor_SMD:R_0402_1005MetricR5
110μFCapacitor_SMD:C_0402_1005MetricC2
13.3μHInductor_SMD:L_0402_1005MetricL1
1ESP32-C3-MINI-1PCM_Espressif:ESP32-C3-MINI-1U1
1HX711Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU3
1JST 1x04Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_HorizontalJ3
1MCP73871Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmU2

Similar boards

  • 2 layers70 × 35 mmOpenWatts, the printed circuit board in 3D

    OpenWatts

    ikonis/OpenWatts

    OpenWatts is a crank-mounted, single-sided cycling power meter built around an ESP32-C3. A bonded strain-gauge bridge and HX711 measure crank torque, while an LSM6DS3 IMU provides cadence and motion wake.

    41 parts12
  • 4 layers70 × 45 mmMini dyno, the printed circuit board in 3D

    Mini dyno

    EhlOps/mini-dyno

    The mini dyno (dynamometer) is a tool created to measure the torque and power output of an engine or motor. The mechanical portion of the dyno functions as a water brake.

    58 partsCERN-OHL-P-2.0
  • 2 layers86.4 × 110 mmTeensy beats, the printed circuit board in 3D

    Teensy beats

    trailhead/teensy-beats

    Teensy Beats Shield

    144 parts67GPL-3.0
  • 2 layers98 × 56 mmThermal pcb, the printed circuit board in 3D

    Thermal pcb

    Badbird5907/thermal-camera

    My design of a cheap and affordable thermal camera

    68 parts59MIT
  • 2 layers57 × 97 mmMainCollar, the printed circuit board in 3D

    MainCollar

    plyalex/OpenFence

    OpenFence is an open source GPS based digital livestock fencing system and web interface, aiming to reduce barriers of using cell grazing.

    78 parts28GPL-3.0
  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT
  • 4 layers145.5 × 64 mmMuffin, the printed circuit board in 3D

    Muffin

    JunOllyLi/TX_PCB

    NOTE: the latest PCB had been manufactured was v2.0. But it had the Gimbal ZH-connector reversed. The schematics and PCB drawing had been updated to v2.1 to fix that. But v2.1 had not been really manufactured yet.

    138 parts17
  • 2 layers98.5 × 34 mmPulse LoRa, the printed circuit board in 3D

    Pulse LoRa

    risejohan/2Bit

    In this repo we can see some designs with free use for the community, 2 Bit electronic

    86 parts17

Questions

How big is the 123-pcb design PCB?

It measures 36.5 × 46 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 123-pcb design use?

22 parts, built around the ESP32-C3-MINI-1, MCP73871EV and HX711. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 123-pcb design KiCad files?

From the ShriyanGote/cse123a-project repository on GitHub, at the commit this page was made from: the board is Hardware Notes/PCB Design/123-pcb-design.kicad_pcb and its schematic Hardware Notes/PCB Design/123-pcb-design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 123-pcb design design in my own project?

Its repository states no licence, so its author keeps all rights: ask ShriyanGote before reusing the design.