2 layers86.4 × 63.5 mm
2 layers86.4 × 110 mm
Teensy beats
trailhead/teensy-beats67Teensy Beats Shield
- Size
- 86.4 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 134
- Pads
- 612
- Tracks, vias
- 1,771, 397
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Sep 2018
- Updated
- 8 Feb 2021
Overview
Teensy beats is an open-source printed circuit board by trailhead, from the trailhead/teensy-beats repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 86.4 × 110 mm with 144 parts on 134 nets, routed with 1,771 tracks and 397 vias.
It is built around the MCP73871EV, M25PX32-VMW6E and TPS61090_1_2, with the APA-102C-NEW and BSS138 among its other parts. Its parts include 36 capacitors, 30 resistors, 30 diodes, 25 switches and 7 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5MCP73871EV
-ModulesMicrochip Technology
M25PX32-VMW6E
SO-8-W-40℃~+85℃ 2.7V~3.6V 32Mbit 75MHz SPI SO-8-W NOR FLASH ROHSMicron TechNOR FLASH
TPS61090_1_2
UncategorisedTexas InstrumentsAPA-102C-NEW
LED-6-1(5x5)LED-6-1(5x5) New Arrivals ROHSAPA ELECTRONICUncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdteensy-beats
Teensy Beats Shield
An all-in-one, made to hack step sequencer built around the Teensy platform with LiPo charging, touch TFT, encoders, buttons, and RGB leds.
Project build log and photos here: https://hackaday.io/project/161127-teensy-beats-shield
...
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 0.1uF | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C5, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 +4 |
| 20 | APA102C | teensy_beats_parts:APA102C-2020 | LED1, LED2, LED3, LED4, LED5, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20 +4 |
| 20 | SW_Push | Buttons_Switches_SMD:SW_SPST_EVQQ2 | S1, S2, S3, S4, S5, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20 +4 |
| 9 | 100 | Resistors_SMD:R_0805 | R2, R3, R4, R5, R6, R7, R19, R21, R24 |
| 8 | 10K | Resistors_SMD:R_0805 | R1, R16, R17, R26, R27, R28, R29, R30 |
| 6 | 0.1uF | Capacitors_SMD:C_0805 | C24, C27, C28, C30, C32, C33 |
| 5 | 2.2uF | Capacitors_SMD:C_0805 | C21, C26, C29, C31, C34 |
| 5 | D | Diodes_SMD:D_0805 | D1, D2, D3, D4, D5 |
| 5 | TestPoint | teensy_beats_parts:TestPoint1mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | Rotary_Encoder_Switch | teensy_beats_parts:Bourns-SMD-Encoder | SW1, SW2, SW3, SW4 |
| 3 | 2.2K | Resistors_SMD:R_0805 | R22, R23, R25 |
| 2 | 1.87M | Resistors_SMD:R_0805 | R10, R13 |
| 2 | 100K | Resistors_SMD:R_0805 | R9, R12 |
| 2 | 10uF | Capacitors_SMD:C_0805 | C23, C36 |
| 2 | 200K | Resistors_SMD:R_0805 | R14, R18 |
| 2 | BSS138 | digikey-footprints:SOT-23-3 | Q1, Q2 |
| 2 | STAT1 | LEDs:LED_0805 | D7, D10 |
| 1 | 100uF | Capacitors_SMD:C_1210 | C22 |
| 1 | 1K | Resistors_SMD:R_0805 | R11 |
| 1 | 1uF | Capacitors_SMD:C_0805 | C25 |
| 1 | 270K | Resistors_SMD:R_0805 | R8 |
| 1 | 330 | Resistors_SMD:R_0805 | R20 |
| 1 | 340K | Resistors_SMD:R_0805 | R15 |
| 1 | 4.7uF | Capacitors_SMD:C_0805 | C35 |
| 1 | 50K | teensy_beats_parts:RV100F-30-4K1-B50K | RV1 |
| 1 | 600R | Inductors_SMD:L_0805 | L2 |
| 1 | AP7313-1.8V | digikey-footprints:SOT-23-3 | U6 |
| 1 | AudioJack3_Ground | teensy_beats_parts:SJ1-3523N | J2 |
| 1 | Conn_01x02_Female | Connectors_JST:JST_PH_S2B-PH-K_02x2.00mm_Angled | J1 |
| 1 | Conn_01x02_Male | Pin_Headers:Pin_Header_Straight_1x02_Pitch1.27mm | J4 |
| 1 | Conn_01x04_Male | Connectors_JST:JST_SH_BM04B-SRSS-TB_04x1.00mm_Straight | J3 |
| 1 | D_x2_KCom_AAK | digikey-footprints:SOT-23-3 | D6 |
| 1 | L | Inductors_SMD:L_Taiyo-Yuden_NR-60xx | L1 |
| 1 | M25PX32-VMW | SMD_Packages:SOIC-8-N | U2 |
| 1 | MCP73871 | Housings_DFN_QFN:QFN-20-1EP_4x4mm_Pitch0.5mm | U4 |
| 1 | Microphone_Condenser | teensy_beats_parts:AOM-6738P-R | MK1 |
| 1 | SGTL5000 | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U7 |
| 1 | STAT2 | LEDs:LED_0805 | D9 |
| 1 | SW_Push | Buttons_Switches_THT:SW_Tactile_SKHH_Angled | SW5 |
| 1 | TFT_TOUCH_SPI | teensy_beats_parts:2.4inTFT_TOUCH_SPI | U3 |
| 1 | TPS61090 | Housings_DFN_QFN:QFN-16-1EP_4x4mm_Pitch0.65mm | U5 |
| 1 | Teensy3.6 | teensy_beats_parts:Teensy35_36 | U1 |
| 1 | Zener 3.3v | Diodes_SMD:D_SOD-323 | D8 |
The 143 most common of 144 parts.
Similar boards
- 2 layers158.5 × 60.5 mm
- 4 layers191.8 × 123 mm
Rdf kicad
megmem044/Portfolio
This repo consists the source code for the different projects listed on my resume
265 parts - 2 layers23.4 × 51.3 mm
- 2 layers76.2 × 76.2 mm
- 4 layers74 × 104 mm
- 4 layers98 × 124.4 mm
Beepy
CarbonComputers/Piberry-12
PiBerry v12 marks the final and most refined revision of the PiBerry handheld Linux terminal. Designed with both form and function in mind, this version brings together the best elements of previous iterations while…
109 parts9MIT - 4 layers68.5 × 89.9 mm
Questions
How big is the Teensy beats PCB?
It measures 86.4 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Teensy beats use?
144 parts, built around the MCP73871EV, M25PX32-VMW6E, TPS61090_1_2 and APA-102C-NEW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Teensy beats KiCad files?
From the trailhead/teensy-beats repository on GitHub, at the commit this page was made from: the board is hardware/teensy_beats.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Teensy beats design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).