
LoomETec
augustoSantoni/LoomETec
LOOMETEC es un proyecto solidario para automatizar la producción de mantas destinadas a recién nacidos vulnerables.

Conveyor sorting is an open-source printed circuit board by shreyaskulur, from the shreyaskulur/conveyor-belt-sorting-PCB repository on GitHub. It is a 2-layer board of 77.5 × 95.3 mm with 28 parts on 39 nets, routed with 328 tracks and 17 vias.
It is built around the L293D and ULN2003. Its parts include 20 connectors, 4 resistors and 4 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | CONN_01X03 | Connectors_Molex:Molex_KK-6410-03_03x2.54mm_Straight | P4, P5, P6, P7, P8, P17 |
| 5 | CONN_01X02 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P1, P2, P9, P10, P11 |
| 3 | CONN_01X02 | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | P3, P16, P18 |
| 2 | 10K | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 2 | CONN_01X03 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-3pol | P12, P14 |
| 2 | MCT2E | Housings_DIP:DIP-6_W7.62mm_LongPads | U3, U4 |
| 2 | R | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4 |
| 1 | CONN_01X05 | Modified Footprints:TerminalBlock_Pheonix_MKDS1.5-5pol | P20 |
| 1 | CONN_01X05 | Connectors_Molex:Molex_KK-6410-05_05x2.54mm_Straight | P19 |
| 1 | CONN_01X07 | Connectors_Molex:Molex_KK-6410-07_07x2.54mm_Straight | P15 |
| 1 | L293D | Housings_DIP:DIP-16_W7.62mm_LongPads | U1 |
| 1 | POWER | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P13 |
| 1 | ULN2003 | Housings_DIP:DIP-16_W7.62mm_LongPads | U2 |

augustoSantoni/LoomETec
LOOMETEC es un proyecto solidario para automatizar la producción de mantas destinadas a recién nacidos vulnerables.


jmfriedt/SDR-GB-SAR
Opensource, openhardware implementation of a Software Defined Radio (SDR) Ground Based Synthetic-Aperture RADAR (GB-SAR)

tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam

jlecomte/ascom-oag-focuser
Open Source ASCOM-Compatible OAG Focuser For Astrophotography



TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
It measures 77.5 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the L293D and ULN2003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shreyaskulur/conveyor-belt-sorting-PCB repository on GitHub, at the commit this page was made from: the board is conveyor-sorting.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shreyaskulur before reusing the design.