Skip to the content
2 layersAudio Preamplifier Board, the printed circuit board in 3D

Audio Preamplifier Board

shmmolo/PCB-Audio_Preamplifier_Board

Stereo audio preamplifier board featuring an active Baxandall tone control stage for both left and right channels, followed by a dual-channel volume control. The circuit is based on the NE5532 low-noise dual op-amp, operating on a ±12 V dual-rail supply, providing clean and accurate amplification for line-level audio inputs such as AUX sources

Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
27
Pads
88
Tracks, vias
118, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Oct 2025
Updated
29 Oct 2025

Overview

Audio Preamplifier Board is an open-source printed circuit board by shmmolo, from the shmmolo/PCB-Audio_Preamplifier_Board repository on GitHub. It is a 2-layer board with 31 parts on 27 nets, routed with 118 tracks and 0 vias.

It is built around the NE5532. Its parts include 12 capacitors, 12 resistors and 2 connectors. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Audio Preamplifier Board (Active Baxandall)

A stereo audio preamplifier with active Baxandall tone control and NE5532 op-amp for low-noise, high-fidelity performance.

Features

  • Stereo AUX input (3.5 mm jack)
  • Active Baxandall bass and treble control
  • ±12 V supply using LM317/LM337 power source
  • Dual-ganged potentiometers for Bass, Treble, and Volume
  • NE5532 dual op-amp for both channels

Performance

ParameterTypical Value
Bass Boost/Cut±15 dB @ 100 Hz
Treble Boost/Cut±14 dB @ 10 kHz
Slew Rate (NE5532)9 V/µs
THD0.0005 %
Bandwidth10 MHz
Supply Voltage±12 V

Applications

  • Stereo preamp or tone control
  • Signal conditioning for amplifiers
  • DIY audio and analog circuit experimentation

Parts

31
QtyValueFootprintReferences
610kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R4, R6, R9, R11, R12
422nCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1, C3, C4, C6
43.3kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R5, R7, R10
3100kPotentiometer_THT:Potentiometer_Alps_RK163_Dual_HorizontalRV1, RV2, RV3
21.8nCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC2, C5
2100nCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC7, C9
227kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R8
24.7uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC11, C12
247uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC8, C10
2NE5532Op-amp_custom:NE5532Op1, Op2
1AudioPlug3Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_HorizontalJ1
1Screw_Terminal_01x03TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_HorizontalJ2

Similar boards

  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers100 × 68 mmSI4684 SMD, the printed circuit board in 3D

    SI4684 SMD

    PE5PVB/SI4684-DAB-Receiver

    SI4684 ESP32 DAB Receiver

    91 parts135GPL-3.0
  • 2 layers165 × 103.8 mmOutput pcb, the printed circuit board in 3D

    Output pcb

    QuinnFreedman/modular

    A collection of free & open source DIY synthesizer module designs for Eurorack

    128 parts116
  • 2 layers173 × 85 mmAudio board, the printed circuit board in 3D

    Audio board

    EleonoreMizo/pedalevite

    Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.

    268 parts101WTFPL
  • 2 layers84 × 85 mmHbr mk2-rxtx, the printed circuit board in 3D

    Hbr mk2-rxtx

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    239 parts76MIT
  • 2 layers149.9 × 55.9 mmPc amplifier, the printed circuit board in 3D

    Pc amplifier

    dilshan/arduino-mini-amp

    Arduino based stereo audio amplifier system

    140 parts67MIT
  • 4 layers99 × 99 mmMegaBlaster2, the printed circuit board in 3D

    MegaBlaster2

    AidanHockey5/MegaBlaster2

    The latest iteration of my hardware Sega Genesis/Megadrive Video Game Music Player

    120 parts59AGPL-3.0
  • 2 layers80 × 60 mmDigishaper152, the printed circuit board in 3D

    Digishaper152

    jonnor/projects

    Small projects not worthy of dedicated repositories

    61 parts45

Questions

What parts does the Audio Preamplifier Board use?

31 parts, built around the NE5532. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Audio Preamplifier Board KiCad files?

From the shmmolo/PCB-Audio_Preamplifier_Board repository on GitHub, at the commit this page was made from: the board is Hardware/Audio Preamplifier Board.kicad_pcb and its schematic Hardware/Audio Preamplifier Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Audio Preamplifier Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask shmmolo before reusing the design.