2 layers61.3 × 56.6 mm
A S Pcb
Shivansh21git/Controller-BanMarie
This projects includes PCB design for a Hot BanMarie Controller which can be used to controll upto 3 Heater/ Flurocent loads upto 5kw each.
19 parts
2 layers127.9 × 89.4 mm
Controller BanMarie
Shivansh21git/Controller-BanMarieThis projects includes PCB design for a Hot BanMarie Controller which can be used to controll upto 3 Heater/ Flurocent loads upto 5kw each. It also includes the provision for Interface panel connections powered by Atmega328p.
- Size
- 127.9 × 89.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 69
- Pads
- 199
- Tracks, vias
- 489, 31
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Dec 2025
- Updated
- 4 Dec 2025
Overview
Controller BanMarie is an open-source printed circuit board by Shivansh21git, from the Shivansh21git/Controller-BanMarie repository on GitHub. It is a 2-layer board of 127.9 × 89.4 mm with 68 parts on 69 nets, routed with 489 tracks and 31 vias.
It is built around the ATMEGA328P-PU, BTA16-600B and HLK-5M05, with the MOC3020M among its other parts. Its parts include 22 resistors, 10 connectors, 9 capacitors, 6 ICs and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BTA16-600B
TO-220A-40℃~+125℃ 1 TRIAC 1.5V 160A@20ms 16A 1V 500mW 50mA 600V 60mA TO-220A Thyristors (SCR)/Modules ROHSKTPThyristors (SCR)/Modules
HLK-5M05
DIP,38x23mm0.1W 18mm 1A 23mm 38mm 3kV 50mVp-p 5V 5W 70% 70V~350V 85VAC~264VAC AC/DC-DC Short Circuit Protection、Over Current Protection ±0.2% DIP,38x23mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
MOC3020M
DIP-6-40℃~+85℃ 1 1.15V 4.17kV 400V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R6, R16, R17, R18, R19 |
| 4 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R9, R14, R15 |
| 3 | 10nf | Capacitor_THT:C_Rect_L11.5mm_W5.0mm_P10.00mm_MKT | C1, C4, C6 |
| 3 | 180R | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1, R10, R20 |
| 3 | 39R | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R8, R12, R21 |
| 3 | 680R | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R7, R11, R22 |
| 3 | BTA16-600B | BTA26 600B:TO552P1530X450X2110-3B | Q1, Q2, Q3 |
| 3 | MOC3020M | Package_DIP:DIP-6_W7.62mm_Socket | U1, U3, U5 |
| 2 | 400nf | Capacitor_THT:C_Rect_L11.5mm_W5.0mm_P10.00mm_MKT | C2, C5 |
| 2 | 47K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R4, R5 |
| 2 | 4N35 | Package_DIP:DIP-6_W7.62mm | U2, U4 |
| 2 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C15, C16 |
| 2 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4 |
| 2 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 2 | NTC | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J9, J10 |
| 2 | Screw_Terminal_01x03 | Connector_Wire:SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm | J1, J8 |
| 1 | 100nf | Capacitor_THT:C_Rect_L11.5mm_W5.0mm_P10.00mm_MKT | C3 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U8 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_CUI_CST-931RP-A | BZ1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C10 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | Conn_02x05_Odd_Even_Shielded | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J11 |
| 1 | Crystal | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D2 |
| 1 | HLK-5M05 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-5Mxx | PS1 |
| 1 | LOGO | LOGO | G*** |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R13 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW1 |
| 1 | Screw_Terminal_01x02 | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J7 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Screw_Terminal_01x06 | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J2 |
| 1 | Varistor | Varistor:RV_Disc_D12mm_W3.9mm_P7.5mm | RV1 |
| 1 | W10G | Diode_THT:Diode_Bridge_Round_D9.8mm | D1 |
The 62 most common of 68 parts.
More from Shivansh21git/Controller-BanMarie
1Similar boards
- 2 layers107 × 62 mm
- 2 layers100 × 100 mm
- 2 layers240 × 63 mm
- 2 layers147.8 × 106.3 mm
Mr washi
mayermakes/MyGenWashy
Generic washing Machine Controller - Result of the TuttleButtle Hackathon 2025
54 parts12GPL-3.0 - 4 layers78 × 78 mm
- 2 layers116.4 × 60 mm
- 2 layers100 × 100 mm
- 2 layers98.6 × 98.6 mm
ReflowMate
Omar-Magdy0/ReflowMate
To start small , grow big. current focus is mainly on providing : Digital Soldering iron support Hot air gun support 3d printable Accessories
97 parts1
Questions
How big is the Controller BanMarie PCB?
It measures 127.9 × 89.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller BanMarie use?
68 parts, built around the ATMEGA328P-PU, BTA16-600B, HLK-5M05 and MOC3020M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller BanMarie KiCad files?
From the Shivansh21git/Controller-BanMarie repository on GitHub, at the commit this page was made from: the board is test.kicad_pcb and its schematic A_S_Pcb/A_S_Pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller BanMarie design in my own project?
Its repository states no licence, so its author keeps all rights: ask Shivansh21git before reusing the design.