KiCad practice repository for learning PCB design, schematic capture, and hardware prototyping. Contains experimental circuits, test layouts, and design exercises.
ESP32 is an open-source printed circuit board by Shiv115singh, from the Shiv115singh/kicad_example_projects- repository on GitHub. It is a 4-layer board of 31.5 × 40.4 mm with 29 parts on 29 nets, routed with 182 tracks and 30 vias.
It is built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3 and USBLC6-2SC6, with the PESD5V0L1ULD among its other parts. Its parts include 10 capacitors, 9 resistors, 3 ICs, 3 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
This project is intended for learning and skill development in PCB design.
It was implemented using KiCad, with support from online learning resources including YouTube tutorials and technical documentation available on Google.
it is created for learning purposes only.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R7, R8, R9 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C9, C10 |
| 2 | 5K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 2 | TBD | Capacitor_SMD:C_0201_0603Metric | C7, C8 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | PESD5V0L1ULD | Diode_SMD:D_SOD-882D | D1 |
| 1 | TDR | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
It measures 31.5 × 40.4 mm and has 4 copper layers, 1 mm thick.
29 parts, built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3, USBLC6-2SC6 and PESD5V0L1ULD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Shiv115singh/kicad_example_projects- repository on GitHub, at the commit this page was made from: the board is ESP32/ESP32.kicad_pcb and its schematic 5v_3v_regulator_circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Shiv115singh before reusing the design.
Shiv115singh/kicad_example_projects-
KiCad practice repository for learning PCB design, schematic capture, and hardware prototyping. Contains experimental circuits, test layouts, and design exercises.
Shiv115singh/kicad_example_projects-
KiCad practice repository for learning PCB design, schematic capture, and hardware prototyping. Contains experimental circuits, test layouts, and design exercises.
Shiv115singh/kicad_example_projects-
KiCad practice repository for learning PCB design, schematic capture, and hardware prototyping. Contains experimental circuits, test layouts, and design exercises.
Shiv115singh/kicad_example_projects-
KiCad practice repository for learning PCB design, schematic capture, and hardware prototyping. Contains experimental circuits, test layouts, and design exercises.
pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.
anasskrim61-wq/esp32-c3-mini
Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project
NozomiNetworks/NN-antenna-manager
Open source project for a custom antenna manager for SDR cards
Akshath2002/ESP32-Mini-Evaluation-Board
A compact 4-layer ESP32 evaluation board designed in KiCad, focused on reliable power distribution, signal integrity, and ease of prototyping.
Benjpp/diy-stream-deck-pcb
PCB for hardware orchestrator from the diy stream deck
BhautikSarvaiya/ESP32_C3_MINI
This project focuses on designing a compact custom PCB based on the ESP32-C3 Mini microcontroller using KiCad 10.0.
d3ckerd/Custom-ESP32
Created a 4 layer custom esp32 dev board using the "ESP32-C3-WROOM-02" module. To learn much about how to create such a module I followed and learned from Pajopcb's youtube tutorials on the esp32.
diaseanodarren-hash/Custom-ESP32-C3-mini-Microcontroller
Designed a custom ESP32-C3-mini microcontroller development board from schematic capture and footprint creation to final PCB layout and trace routing.
