2 layers33.3 × 38 mm
ESP32-C3-WROOM02 dev board
pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.
30 parts2
2 layers75 × 51.5 mm
Diy stream deck pcb
Benjpp/diy-stream-deck-pcbPCB for hardware orchestrator from the diy stream deck
- Size
- 75 × 51.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 36
- Pads
- 157
- Tracks, vias
- 315, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Oct 2026
- Updated
- 19 Oct 2026
Overview
Diy stream deck pcb is an open-source printed circuit board by Benjpp, from the Benjpp/diy-stream-deck-pcb repository on GitHub. It is a 2-layer board of 75 × 51.5 mm with 44 parts on 36 nets, routed with 315 tracks and 14 vias.
It is built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3 and USBLC6-2SC6, with the PESD5V0L1ULD among its other parts. Its parts include 16 resistors, 9 capacitors, 6 switches, 4 diodes and 3 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
PESD5V0L1ULD
DFN1006-2(SOD-882)-55℃~+150℃ 1 10nA 12V 25pF 3.5A@8/20us 42W 5V 6.4V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional DFN1006-2(SOD-882) ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4, C5, C6 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R6, R7, R8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C7, C8, C9 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R16, R17 |
| 3 | LED | LED_THT:LED_D5.0mm | D2, D3, D4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R14 |
| 2 | 5k1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R13 |
| 2 | 5k1 | Resistor_SMD:R_01005_0402Metric | R1, R2 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 1u | Capacitor_THT:C_Rect_L7.2mm_W5.0mm_P5.00mm | C10 |
| 1 | 2k22 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | CMD1 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW3 |
| 1 | CMD2 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW4 |
| 1 | CMD3 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW5 |
| 1 | CMD4 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW6 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | PESD5V0L1ULD | Diode_SMD:D_SOD-882D | D1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7025 | J1 |
Questions
How big is the Diy stream deck pcb PCB?
It measures 75 × 51.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Diy stream deck pcb use?
44 parts, built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3, USBLC6-2SC6 and PESD5V0L1ULD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Diy stream deck pcb KiCad files?
From the Benjpp/diy-stream-deck-pcb repository on GitHub, at the commit this page was made from: the board is diy-stream-deck-pcb.kicad_pcb and its schematic diy-stream-deck-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Diy stream deck pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Benjpp before reusing the design.
Similar boards
- 4 layers38 × 28.5 mm
Esp32 iot pcb
anasskrim61-wq/esp32-c3-mini
Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project
29 parts1 - 4 layers100.2 × 62.9 mm
NN antenna manager
NozomiNetworks/NN-antenna-manager
Open source project for a custom antenna manager for SDR cards
71 parts1 - 4 layers29.4 × 39.3 mm
ESP32 C3 Mini
Akshath2002/ESP32-Mini-Evaluation-Board
A compact 4-layer ESP32 evaluation board designed in KiCad, focused on reliable power distribution, signal integrity, and ease of prototyping.
29 parts - 4 layers34.4 × 42.5 mm
Third project esp
BhautikSarvaiya/ESP32_C3_MINI
This project focuses on designing a compact custom PCB based on the ESP32-C3 Mini microcontroller using KiCad 10.0.
29 parts - 4 layers28.6 × 37.2 mm
Esp32
d3ckerd/Custom-ESP32
Created a 4 layer custom esp32 dev board using the "ESP32-C3-WROOM-02" module. To learn much about how to create such a module I followed and learned from Pajopcb's youtube tutorials on the esp32.
31 partsMIT - 4 layers29.8 × 35 mm
Custom ESP32 Board
diaseanodarren-hash/Custom-ESP32-C3-mini-Microcontroller
Designed a custom ESP32-C3-mini microcontroller development board from schematic capture and footprint creation to final PCB layout and trace routing.
29 parts - 2 layers94.5 × 37.5 mm
