2 layers100 × 129.8 mm
Muon geiger
shiftregister/shiftregister
Software and hardware for the Shift Register project: http://shiftregister.info/
89 parts4GPL-3.0
2 layers
Core test
shiftregister/shiftregister4Software and hardware for the Shift Register project: http://shiftregister.info/
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 106
- Pads
- 280
- Tracks, vias
- 210, 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 25 Jul 2017
- Updated
- 20 Jun 2019
Overview
Core test is an open-source printed circuit board by shiftregister, from the shiftregister/shiftregister repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 46 parts on 106 nets, routed with 210 tracks and 6 vias.
It is built around the SN754410NE. Its parts include 18 resistors, 11 connectors, 9 ICs, 5 capacitors and 2 transistors.
Main components
1README
README.mdshiftregister
Software and hardware for the Shift Register project: http://shiftregister.info/
Muon detection hardware is based on the work of Robert Hart: http://www.hardhack.org.au/projects
Core memory hardware is based on the work of Wayne Holder: https://sites.google.com/site/wayneholder/one-bit-ferrite-core-memory
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10R | Resistors_ThroughHole:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | SN754410 | Housings_DIP:DIP-16_W7.62mm_LongPads | U2, U3, U4, U5, U6, U7, U8, U9 |
| 5 | CONN_01X16 | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | P1, P2, P5, P9, P10 |
| 3 | 100N | Capacitors_ThroughHole:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2, C3, C5 |
| 2 | 10K | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R17, R18 |
| 2 | 10U | Capacitors_ThroughHole:CP_Radial_D10.0mm_P5.00mm | C1, C4 |
| 2 | 2n3904 | TO_SOT_Packages_THT:TO-92_Molded_Wide | Q1, Q2 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P6, P7 |
| 2 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P4, P8 |
| 1 | 1N4148 | Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 7805 | TO_SOT_Packages_THT:TO-220_Vertical | U1 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P3 |
| 1 | SENSE_DATA | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | P11 |
Questions
What parts does the Core test use?
46 parts, built around the SN754410NE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Core test KiCad files?
From the shiftregister/shiftregister repository on GitHub, at the commit this page was made from: the board is core_driver/core_test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Core test design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from shiftregister/shiftregister
2- 2 layers
Kicad test
shiftregister/shiftregister
Software and hardware for the Shift Register project: http://shiftregister.info/
2 parts4GPL-3.0
Similar boards
- 2 layers62.9 × 32.4 mm
Volume AlpsRK16814MG
mithat/Volume-AlpsRK16814MG
Alps RK16814MG motorized potentiometer with H-bridge motor drive.
12 parts6 - 2 layers94.8 × 47.8 mm
- 2 layers69.9 × 52.6 mm
ArduiBodet
PatriceG/ArduiBodet
Horloge mère pour Horloge de type Bodet pilotée par Arduino
22 parts5GPL-3.0 - 2 layers162.6 × 123.2 mm
To print
anorimaki/selfbalancing-robot
A buck converter to generate the 5V power rail would have been a better choice because it would be more efficient (extending battery life) and eliminate the need of a second battery (the circuit could be plugged with…
124 parts2 - 2 layers111.8 × 95.3 mm
- 2 layers80.1 × 85.2 mm
Omni wheel
kashishkebab9/omni-mapper
Omni-Wheeled Robot with custom PCB All Mechanical Assemblies, PCBs, Firmware, and Software designed, architected and programmed by Kashish Garg
52 parts1MIT - 2 layers72 × 47 mm
- 2 layers99 × 99 mm
Due behavior breakout
losonczylab/Hardware
Includes AutoDesk Inventor projects used for lab rigs and other miscellaneous CAD files.
109 parts1GPL-3.0