shibainusan/hwdevServo is an open-source printed circuit board by shibainusan, from the shibainusan/hwdev repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 60 × 70 mm with 17 parts on 42 nets, routed with 47 tracks and 0 vias.
It is built around the FQP27P06. Its parts include 5 connectors, 3 switches, 2 capacitors, 1 IC and 1 transistor. It belongs with the robots and motor control boards and the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1, J2, J3 |
| 3 | SW_Omron_B3FS | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4, J5 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | FQP27P06 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | Pico | RPi_Pico:RPi_Pico_SMD_TH | U1 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
It measures 60 × 70 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the FQP27P06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shibainusan/hwdev repository on GitHub, at the commit this page was made from: the board is servo/pcb/main.kicad_pcb and its schematic servo/pcb/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
mattronix/battery-board
KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…
mattwach/portable_led_lamp
Contains firmware, schematics and 3D models for a LED lamp that can accept a wide range of voltages.
pietwauters/esp32_scoring_device_hardware
Hardware files for the scoring device
xHain-hackspace/xDoorPiHat
Schematics and Boardfiles for PiHat that opens and closes the xDoor
borisg912/3DNA
This project creates a flat cylindrical DNA model with: - Magnetic DNA bases with color-coded NeoPixel LEDs and unique resistor values for identification - Interactive base pairing game that validates correct DNA base…
d-diot/ESP8266-LolinV3-Lamp
A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip
rbat05/SolarWeatherStation
Self-sustaining weather monitoring system with dual-node architecture.
