2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers39 × 23 mm
Klipper screen riser
Sheepy3/HelpfulPrinterPCBsSome PCBs I designed for my Ender3NG, which can be used on other printers too!
- Size
- 39 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 27
- Pads
- 71
- Tracks, vias
- 108, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Dec 2024
- Updated
- 23 Dec 2024
Overview
Klipper screen riser is an open-source printed circuit board by Sheepy3, from the Sheepy3/HelpfulPrinterPCBs repository on GitHub, published under the MIT licence. It is a 2-layer board of 39 × 23 mm with 7 parts on 27 nets, routed with 108 tracks and 0 vias.
Its parts include 6 connectors and 1 switch.
README
README.mdHelpfulPrinterPCBs
Some PCBs I designed for my Ender3NG, which can be used on other printers too!
Klipperscreen Riser
I designed this riser to use a 11-pin ribboncable to rise a small TFT off my rasberry PI zero 2W. this allowed me to have the screen on the front of my priter and the raspberry pi in the back with the rest of the electronics. It also includes a switch for the backlight! Here's the screenwiki page I found the pinout on..
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x11_Socket | Connector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_Vertical | J1, J3 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J6 |
| 1 | Conn_01x13_Socket | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J5 |
| 1 | Conn_02x13_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J2 |
| 1 | SS-12D00-G 4 E | Library:1P2T_SS-12D00_CNK | SW1 |
Questions
How big is the Klipper screen riser PCB?
It measures 39 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Klipper screen riser use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Klipper screen riser KiCad files?
From the Sheepy3/HelpfulPrinterPCBs repository on GitHub, at the commit this page was made from: the board is KlipperScreen_Riser/klipper_screen_riser.kicad_pcb and its schematic KlipperScreen_Riser/klipper_screen_riser.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Klipper screen riser design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
