2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers30 × 51 mm
Driver breakout module
SharkCNC/driver-breakout-moduleSimple RJ45 breakout board for Closed Loop Driver
- Size
- 30 × 51 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 14
- Pads
- 38
- Tracks, vias
- 74, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Jul 2020
- Updated
- 13 Jul 2020
Overview
Driver breakout module is an open-source printed circuit board by SharkCNC, from the SharkCNC/driver-breakout-module repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 51 mm with 11 parts on 14 nets, routed with 74 tracks and 0 vias.
It is built around the RJ45. Its parts include 6 resistors, 2 connectors and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdIMPORTANT! This board is under development, reproducing it will be at your own risk.
driver-breakout-module
This breakout board makes it possible to connect the SharkCNC motherboard and the drivers using shielded RJ45 cable.
<the board is already being produced, soon real photos>
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 2k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | DRIVER | driver-breakout-module:PinHeader_1x10_P5.08mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LOGO | vm_vitali:vm_logo | G*** |
| 1 | RJ45 | Connector_RJ:RJ45_Ninigi_GE | J1 |
| 1 | Shield | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
Questions
How big is the Driver breakout module PCB?
It measures 30 × 51 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Driver breakout module use?
11 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Driver breakout module KiCad files?
From the SharkCNC/driver-breakout-module repository on GitHub, at the commit this page was made from: the board is driver-breakout-module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Driver breakout module design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers84 × 82 mm
Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm
- 2 layers50 × 55.4 mm
- 2 layers67.9 × 47.8 mm
Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm
- 4 layers73.9 × 84.5 mm
Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers99 × 60 mm
Pwr
mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
64 parts46