

Sparkplug
Signal Monitor Device
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 12
- Pads
- 38
- Tracks, vias
- 109, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Aug 2020
- Updated
- 19 Aug 2020
Overview
Sparkplug is an open-source printed circuit board by shannon-greenlight, from the shannon-greenlight/Sparkplug repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 16 parts on 12 nets, routed with 109 tracks and 10 vias.
It is built around the MMBT3904 and MMBT3906. Its parts include 8 resistors, 2 transistors, 1 diode, 1 connector and 1 switch.
Main components
2README
README.mdSparkplug
Signal Monitor Device
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R1, R2, R7 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1, TP2 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 300K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 330K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | AudioJack3 | sputterizer:Plug_TRS | J1 |
| 1 | Batt Holder | sputterizer:BatteryHolder_Keystone_3031_1x10mm | BT1 |
| 1 | LED_RGBA | sputterizer:LED_RGBA1.6mm | D1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | SW_Push_Dual | Button_Switch_THT:SW_PUSH_6mm | SW1 |
More from shannon-greenlight/Sparkplug
1- 2 layers32 × 68 mm

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers68.8 × 53.6 mm

Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 4 layers304.8 × 330.2 mm

- 2 layers27.9 × 101.6 mm

MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 6 layers160 × 100 mm

- 6 layers304.8 × 243.8 mm

- 2 layers60.2 × 106.5 mm

TiNRS - DuckTape
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
262 parts87MIT - 2 layers84 × 85 mm

Questions
What parts does the Sparkplug use?
16 parts, built around the MMBT3904 and MMBT3906. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sparkplug KiCad files?
From the shannon-greenlight/Sparkplug repository on GitHub, at the commit this page was made from: the board is Sparkplug.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sparkplug design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).