2 layers78 × 60 mm
2 layers95.5 × 15 mm
Binary counter
shannietron/binary_counter- Size
- 95.5 × 15 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 29
- Pads
- 92
- Tracks, vias
- 196, 35
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2024
- Updated
- 14 Aug 2024
Overview
Binary counter is an open-source printed circuit board by shannietron, from the shannietron/binary_counter repository on GitHub. It is a 2-layer board of 95.5 × 15 mm with 44 parts on 29 nets, routed with 196 tracks and 35 vias.
Its parts include 9 resistors, 8 diodes, 4 capacitors, 2 ICs and 1 connector. It belongs with the RISC-V boards of this library.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | R_US | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 8 | LED | LED:LED0805-R-RD | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | TurboCase:CaseCorner_M3 | , , , | |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 1 | CH32V003FxUx | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U1 |
| 1 | Conn_01x03_Pin | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | OPO | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | PA1 | TestPoint:TestPoint_Pad_D2.0mm | TP9 |
| 1 | PA2 | TestPoint:TestPoint_Pad_D2.0mm | TP10 |
| 1 | PD0 | TestPoint:TestPoint_Pad_D2.0mm | TP12 |
| 1 | PD3 | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | PD5 | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | PD6 | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | PD7 | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | SWIO | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | SW_MEC_5E | TACT Switch:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | SW2 |
| 1 | VDD | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U2 |
Questions
How big is the Binary counter PCB?
It measures 95.5 × 15 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Binary counter use?
44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Binary counter KiCad files?
From the shannietron/binary_counter repository on GitHub, at the commit this page was made from: the board is Binary_Counter.kicad_pcb and its schematic Binary_Counter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Binary counter design in my own project?
Its repository states no licence, so its author keeps all rights: ask shannietron before reusing the design.
Similar boards
- 2 layers115 × 14.5 mm
- 2 layers37.7 × 20 mm
- 2 layers88.9 × 88.4 mm
- 2 layers125 × 98 mm
3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm
RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm
Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0 - 2 layers250 × 32 mm
