
GrblHAL CNC3040m
shaise/grblHAL_CNC3040
Hardware implimentation of the grblHAL driver to work with Chinese CNC3040 type of machines

Hardware implimentation of the grblHAL driver to work with Chinese CNC3040 type of machines
GrblHAL Keypad is an open-source printed circuit board by shaise, from the shaise/grblHAL_CNC3040 repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 165 × 110 mm with 86 parts on 81 nets, routed with 625 tracks and 62 vias.
Its parts include 31 ICs, 31 diodes, 13 resistors and 2 connectors. It belongs with the keyboards and input boards of this library.
Hardware implementation of the grblHAL driver to work with Chinese CNC3040 type of machines
This project is intended to upgrade any cnc machine that is controlled via parallel port such as the popular chinese CNC3040.
Instead of having a dedicated LinuxCNC PC or mach32, This device connects directly to the CNC's controller, and can be controlled using any grbl Sender sw via USB connection or even WiFi!
This device supports an optional stand-alone KeyPad, that is also included in this project.
This project is based on the great work of @terjeio and his GrblHAL project. Thanks!
For instructions how to assemble, program and use the devices refer to the Wiki.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 1N5819 | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 30 | CMX_LED | CherryMX_KailhSocket_LED:CherryMX_1.00u_KailhSocket_LED | U1, U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23 +14 |
| 9 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8, H9 |
| 6 | 68R_0603 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6 |
| 5 | 330R_0603 | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10, R11 |
| 2 | 47R_0603 | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 1 | 1N5817_SMA | Diode_SMD:D_SMA | D31 |
| 1 | AudioJack4 | ExtraFootprints:Jack_3.5mm_PJ-320A | J2 |
| 1 | BP | BP:BLUEPILL-BARE | U31 |
| 1 | LCD_PIN2.54 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |

shaise/grblHAL_CNC3040
Hardware implimentation of the grblHAL driver to work with Chinese CNC3040 type of machines

shaise/grblHAL_CNC3040
Hardware implimentation of the grblHAL driver to work with Chinese CNC3040 type of machines


MKesenheimer/fault-injection-library
Python library to perform fault-injection attacks on microcontrollers



cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.

AudioMorphology/Europi
Opensource sequencer software for Raspberry Pi equipped with Eurorack-compatible hardware


It measures 165 × 110 mm and has 2 copper layers, 1.6 mm thick.
86 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shaise/grblHAL_CNC3040 repository on GitHub, at the commit this page was made from: the board is hardware/CNC3040_Keypad/GrblHAL_Keypad.kicad_pcb and its schematic hardware/CNC3040_Driver/GrblHAL_CNC3040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).