
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards

Building a project to automate some Halloween decorations.
Hallow is an open-source printed circuit board by sh33pr0ck, from the sh33pr0ck/Halloween-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 73.2 × 56 mm with 15 parts on 62 nets, routed with 218 tracks and 13 vias.
It is built around the L293D. Its parts include 4 connectors, 3 resistors, 3 diodes, 1 IC and 1 transistor.
Building a project to automate some Halloween decorations.
Based on the Raspberry Pi Shield template.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R_US | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3 |
| 2 | LED | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | D2, D3 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Conn_01x06 | motion:HC-SR501 | J2 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | G5Q-1 | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | L293D |
| 1 | LOGO | graphics:goat | G*** |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J1 |
| 1 | WeMos_mini | D1_mini_board:D1_mini_board | U1 |

ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards

NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)

geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…


harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.



It measures 73.2 × 56 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sh33pr0ck/Halloween-pcb repository on GitHub, at the commit this page was made from: the board is Hallow.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).