Skip to the content
2 layers73.2 × 56 mmHallow, the printed circuit board in 3D

Building a project to automate some Halloween decorations.

Size
73.2 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
62
Pads
109
Tracks, vias
218, 13
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Oct 2018
Updated
5 Oct 2018

Overview

Hallow is an open-source printed circuit board by sh33pr0ck, from the sh33pr0ck/Halloween-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 73.2 × 56 mm with 15 parts on 62 nets, routed with 218 tracks and 13 vias.

It is built around the L293D. Its parts include 4 connectors, 3 resistors, 3 diodes, 1 IC and 1 transistor.

Main components

1

README

README.md

Halloween-pcb

Building a project to automate some Halloween decorations.

Based on the Raspberry Pi Shield template.

Parts

15
QtyValueFootprintReferences
3R_USResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3
2LEDConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalD2, D3
12N3904Package_TO_SOT_THT:TO-92_InlineQ1
1Conn_01x06motion:HC-SR501J2
1Conn_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ3
1Conn_02x20_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalP1
1DDiode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD1
1G5Q-1Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_CK1
1L293DPackage_DIP:DIP-16_W7.62mmL293D
1LOGOgraphics:goatG***
1Screw_Terminal_01x03TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_HorizontalJ1
1WeMos_miniD1_mini_board:D1_mini_boardU1

Similar boards

  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers84.3 × 58.4 mmEnocderDriver, the printed circuit board in 3D

    EnocderDriver

    NikodemBartnik/Small-Projects

    All of smaller projects (Arduino, PCBs, electronics, code)

    35 parts55
  • 2 layers56.4 × 72.6 mmRas pi hat, the printed circuit board in 3D

    Ras pi hat

    geno543/Redropi_highway

    the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…

    8 parts13
  • 2 layers87.5 × 70 mmLaberinto, the printed circuit board in 3D

    Laberinto

    CRM-UAM/CRMaze

    Open source robot for maze solving + line following

    34 parts12
  • 2 layers92.5 × 62.5 mmDropGenPCB, the printed circuit board in 3D

    DropGenPCB

    harrislab-brown/DropGen

    DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.

    25 parts12CC-BY-SA-4.0
  • 2 layers47.5 × 49.5 mmElectronic, the printed circuit board in 3D

    Electronic

    zosko/magspoof

    Magspoof with Arduino Pro Micro

    5 parts11
  • 2 layers120.7 × 184.1 mmBeachRover circuit, the printed circuit board in 3D

    BeachRover circuit

    wizardofrobots/roverCode

    Jetson Nano powered Arduino Rover

    11 parts10
  • 2 layers90 × 53.4 mmOpenOx, the printed circuit board in 3D

    OpenOx

    hacklabkyiv/openox-pcb

    PCB design for OpenOx - open source oxygen concentrator

    43 parts7GPL-3.0

Questions

How big is the Hallow PCB?

It measures 73.2 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hallow use?

15 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hallow KiCad files?

From the sh33pr0ck/Halloween-pcb repository on GitHub, at the commit this page was made from: the board is Hallow.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hallow design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).