2 layers55 × 80 mm
Board esp32 v2
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
101 parts1.1k
2 layers55 × 40 mm
E900M30S shield
sgofferj/E900M30S-shield2Breakout board for eByte E22 SPI modules with CM4 footprint
- Size
- 55 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 13
- Pads
- 38
- Tracks, vias
- 63, 18
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Feb 2025
- Updated
- 26 Feb 2025
Overview
E900M30S shield is an open-source printed circuit board by sgofferj, from the sgofferj/E900M30S-shield repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 55 × 40 mm with 5 parts on 13 nets, routed with 63 tracks and 18 vias.
It is built around the E22-900M30S. Its parts include 2 capacitors, 2 connectors and 1 IC. It belongs with the radio and wireless and computers and single-board computers boards of this library.
Main components
1README
README.mdBreakout board for eByte E22 SPI modules with CM4 footprint
License: CC-BY-SA 4.0
The main purpose of this board is easy connection of an eByte E22 SPI module to a CM4 baseboard but it also works great as a general breakout board for experiments with one of the E22-xxxMyyS modules.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100uF | Capacitor_SMD:C_1210_3225Metric | C2 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric | C1 |
| 1 | Conn02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | E22-900M30S | E22M90030S:XCVR_E22-900M30S | U1 |
Questions
How big is the E900M30S shield PCB?
It measures 55 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E900M30S shield use?
5 parts, built around the E22-900M30S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E900M30S shield KiCad files?
From the sgofferj/E900M30S-shield repository on GitHub, at the commit this page was made from: the board is E900M30S shield.kicad_pcb and its schematic E900M30S shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the E900M30S shield design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers40 × 40 mm
Ikoka nano meshtastic device
ndoo/ikoka-nano-meshtastic-device
A Meshtastic device based on the Seeed Studio XIAO nRF52840 and EBYTE E22-XXXMXXS series LoRa modules. Pinout matches the Meshtastic xiaoble variant.
22 parts104CERN-OHL-P-2.0 - 6 layers144.8 × 106.7 mm
- 2 layers46.5 × 67 mm
Mesh Injection Apparatus v1 015
paperclipsvinny/Meshtastic-Injection-Apparatus
MIA - Meshtastic Injection Apparatus Tool for long range Pen testing
13 parts9MIT - 2 layers31.1 × 94.2 mm
- 4 layers101.5 × 43.6 mm
Alcantara v.1.0
zenitheesc/Alcantara
Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.
90 parts5 - 6 layers84.5 × 56 mm
VLF4 PCB
McMaster-Rocketry-Team/VLF4r2
PCB schematics and layout for Void Lake Fusion 4 Avionics
156 parts3 - 2 layers40 × 40 mm
Ikoka NanoX
YuriySm/Ikoka-NanoX-Meshtastic-Device
Small 1W LoRA on Seeed Studio XIAO nRF52840 PCB for Meshtastic (fork of Ikoka Nano)
33 parts3GPL-3.0