Skip to the content
2 layers82.4 × 73.1 mmXTJ IC Arbiter, the printed circuit board in 3D

XTJ IC Arbiter

sgmiller/tj-cluster

Code to drive Jeep TJ dash clusters via the Chrysler CCD bus

Size
82.4 × 73.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
45
Pads
167
Tracks, vias
336, 17
Pours
10
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Feb 2022
Updated
17 Aug 2026

Overview

XTJ IC Arbiter is an open-source printed circuit board by sgmiller, from the sgmiller/tj-cluster repository on GitHub, published under the MIT licence. It is a 2-layer board of 82.4 × 73.1 mm with 55 parts on 45 nets, routed with 336 tracks and 17 vias.

It is built around the EEC-325X4A, MCP1700-3302E/TO and SP723APP, with the TLV3704IN, K103K10X7RF53L2 and CMF5560R400FHEK among its other parts. Its parts include 15 capacitors, 12 resistors, 7 ICs, 5 diodes and 2 fuses.

Main components

12

README

README.md

tj-cluster

A custom PCB and software to drive Jeep TJ/XJ Dash clusters' CCD bus and receive CAN messages.

Parts

55
QtyValueFootprintReferences
80.1uFCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC3, C4, C5, C8, C12, C13, C14, C16
5TestPointTestPoint:TestPoint_Loop_D2.50mm_Drill1.0mmTP1, TP3, TP5, TP12, TP13
460R4Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4, R5, R11
34.7nFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC2, C6, C7
3TestPointTestPoint:TestPoint_Plated_Hole_D2.0mmTP2, TP4, TP9
210KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR6, R13
213KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2550mVDiode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD4, D13
2MountingHoleMountingHole:MountingHole_3mmH1, H2
2Polyfuse_SmallFuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolderF1, F3
10.01uFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC9
1100uFCapacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mmC10
1120uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC11
1180KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR12
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR8
11uFAutomotive Cap:FA24C15
12M2Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR10
13.3vDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
150KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7
168uHInductor_THT:L_Radial_D7.8mm_P5.00mm_Fastron_07HCPL1
1CDP68HC68S1Package_DIP:DIP-14_W7.62mmU2
1DDiode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD2
1DTM13-12PA-R008DTM13:TE_DTM13-12PA-R008J3
1EEC-325X4Aenclosure:TE_EEC-325X4AU3
1LM2675N-5.0/NOPBPackage_DIP:DIP-8_W7.62mmU1
1LOGOparts:N9Works-SmallG***
1MCP1700-3302E/TOPackage_TO_SOT_THT:TO-92_Inline_WideU6
1MCP2562-H-PPackage_DIP:DIP-8_W7.62mmU4
1SA26ADiode_THT:D_DO-15_P10.16mm_HorizontalD3
1SP723APPPackage_DIP:DIP-8_W7.62mmU5
1TINYPICOTINYPICO:TINYPICOXA1
1TLV3704INR2R Comp:DIP794W53P254L1930H508Q14NIC1

Similar boards

  • 2 layers125.2 × 61.9 mmPDP-8-Serial Discrete, the printed circuit board in 3D

    PDP-8-Serial Discrete

    sierrafoxtrot/PDP-8_Serial_AIO

    A W070 compatible serial interface for the original DEC PDP-8

    103 partsCERN-OHL-W-2.0
  • 2 layers101.6 × 76.2 mmCascadable Full Adder, the printed circuit board in 3D

    Cascadable Full Adder

    Daedalus-op/PCB-Designs

    A repo documenting the creation of a PISO register in Kicad 8.0

    12 parts
  • 2 layers50 × 90 mm4dapter, the printed circuit board in 3D

    4dapter

    timville85/4dapter

    This project combines the NES, SNES, N64 and Genesis DaemonBite Retro Controllers projects together with a custom PCB to support 4 different controllers with a single socketed Arduino Pro Micro.

    16 parts82GPL-3.0
  • 4 layers290 × 215 mmPlacard, the printed circuit board in 3D

    Placard

    tocksin/placard

    PLA computer

    187 parts2AGPL-3.0
  • 2 layers50.8 × 22.9 mmFeather fc, the printed circuit board in 3D

    Feather fc

    MarkGhebrial/feather-fc

    The PCB for my flight controller project

    22 parts1
  • 2 layers30 × 58.5 mmLoragate tht, the printed circuit board in 3D

    Loragate tht

    andrewgho/loragate

    ESP32 + LoRa radio powered reed switch door sensor

    10 parts
  • 2 layers90 × 90 mmP 4.1 2026 Jeff M, the printed circuit board in 3D

    P 4.1 2026 Jeff M

    Jeffrey-McCormick/Project-Heartbeat

    End-to-end embedded system project to accurately measure the heart rate of a person

    38 partsMIT
  • 2 layers36.6 × 41.1 mmProject 2-K Auyeung, the printed circuit board in 3D

    Project 2-K Auyeung

    kyauyeung/PCB-Designs

    Repository for schematic and PCB designs

    11 parts

Questions

How big is the XTJ IC Arbiter PCB?

It measures 82.4 × 73.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the XTJ IC Arbiter use?

55 parts, built around the EEC-325X4A, MCP1700-3302E/TO, SP723APP and TLV3704IN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the XTJ IC Arbiter KiCad files?

From the sgmiller/tj-cluster repository on GitHub, at the commit this page was made from: the board is pcb/XTJ-IC-Arbiter.kicad_pcb and its schematic pcb/XTJ-IC-Arbiter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the XTJ IC Arbiter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).