Skip to the content
2 layers50 × 50 mmTssop48er, the printed circuit board in 3D

There are my personal PCBs... contact me for licensing information.

Size
50 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
34
Pads
188
Tracks, vias
376, 45
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
5 May 2016
Updated
16 Mar 2021

Overview

Tssop48er is an open-source printed circuit board by sgenomics, from the sgenomics/pcbs repository on GitHub. It is a 2-layer board of 50 × 50 mm with 32 parts on 34 nets, routed with 376 tracks and 45 vias.

It is built around the AP1117DG and FT2232D. Its parts include 18 capacitors, 6 resistors, 4 ICs, 2 inductors and 1 connector.

Main components

2

README

README.md

pcbs

There are my personal PCBs... contact me for licensing information.

Parts

32
QtyValueFootprintReferences
14C_SmallCapacitors_SMD:C_0805_HandSolderingC1, C2, C3, C4, C5, C6, C11, C12, C13, C14, C15, C16, C17, C18
410KCapacitors_SMD:C_0805_HandSolderingR1, R3, R4, R5
2100nFCapacitors_SMD:C_0805_HandSolderingC8, C10
24.7uFCapacitors_SMD:c_elec_4x5.3C7, C9
2INDUCTOR_SMALLCapacitors_SMD:C_0805_HandSolderingL1, L2
112kCapacitors_SMD:C_0805_HandSolderingR6
12KCapacitors_SMD:C_0805_HandSolderingR2
193CxxAHousings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU1
1AP1117TO_SOT_Packages_SMD:SOT-223U2
1Crystal_SmallCrystals:HC-49VY1
1FT2232Housings_QFP:LQFP-64_14x14mm_Pitch0.8mmU3
1TSSOP48_NANDtsop48zif:TSOP48ZIFU4
1USB_BusbAtaobao:USB_AP1

More from sgenomics/pcbs

12
  • 2 layers145 × 98 mmStmshieldfull, the printed circuit board in 3D

    Stmshieldfull

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    178 parts2
  • 2 layers100 × 100 mmSeq32, the printed circuit board in 3D

    Seq32

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    163 parts2
  • 2 layers150 × 122 mmStmshieldfull, the printed circuit board in 3D

    Stmshieldfull

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    128 parts2
  • 2 layers54.1 × 53.3 mmStmshieldfull, the printed circuit board in 3D

    Stmshieldfull

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    67 parts2
  • 2 layers100 × 100 mmBabySeq, the printed circuit board in 3D

    BabySeq

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    62 parts2
  • 2 layers62.8 × 18.4 mmEspusb, the printed circuit board in 3D

    Espusb

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    55 parts2
  • 2 layers99.1 × 64.8 mmMultislope, the printed circuit board in 3D

    Multislope

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    53 parts2
  • 2 layers77.7 × 77.7 mmEspusb, the printed circuit board in 3D

    Espusb

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    51 parts2
  • 2 layers101.6 × 61 mmChua, the printed circuit board in 3D

    Chua

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    44 parts2
  • 2 layers64.8 × 53.3 mmLinearccd, the printed circuit board in 3D

    Linearccd

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    42 parts2
  • 2 layers41.5 × 85.5 mmBreak, the printed circuit board in 3D

    Break

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    39 parts2
  • 2 layers135 × 55 mmHp interface, the printed circuit board in 3D

    Hp interface

    sgenomics/pcbs

    There are my personal PCBs... contact me for licensing information.

    39 parts2

Similar boards

  • 6 layers85 × 56 mmKarnix ASB, the printed circuit board in 3D

    Karnix ASB

    Fabmicro-LLC/Karnix_ASB-254

    Karnaugh Interactive Extendable ASIC Simulation Board AKA Karnix ASB-254

    368 parts19
  • 4 layers158 × 95 mmFHNW Pro4E FS19T8-3DPrinterBoard STM32, the printed circuit board in 3D

    FHNW Pro4E FS19T8-3DPrinterBoard STM32

    mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32

    Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

    264 parts17GPL-3.0
  • 2 layers100 × 100 mmHdmilight v3, the printed circuit board in 3D

    Hdmilight v3

    esar/hdmilight-v3

    HDMI Light v3 - FPGA based Ambilight clone with direct HDMI input

    259 parts8GPL-2.0
  • 4 layers130 × 90 mmFrequnecyCounter, the printed circuit board in 3D

    FrequnecyCounter

    LUMERIIX/FrequencyCounter

    FPGA based frequnecy counter hard- and software repository

    129 parts6
  • 2 layers68.6 × 53.3 mmBoardA3P, the printed circuit board in 3D

    BoardA3P

    mrkindustries/BoardA3P

    Microsemi A3P FPGA dev board, arduino-compatible

    73 parts3
  • 4 layers58.4 × 62.2 mmDaybreak mk3b, the printed circuit board in 3D

    Daybreak mk3b

    reedtaylor/daybreak_mk3

    A PCB interface between the Decent Espresso DE1 and USB or Adafriuit Feather HUZZAH32 EESP32

    63 parts3
  • 4 layers65 × 64 mmPiweather, the printed circuit board in 3D

    Piweather

    pluggee/piweather

    raspberry pi based system for weather monitoring and automation

    60 parts1MIT
  • 2 layers87 × 68 mmModbus RJ45-Breakout, the printed circuit board in 3D

    Modbus RJ45-Breakout

    the78mole/ModBus-RJ45-Breakout-2

    The second iteration of the breakout with a Dual-USB-Serial-Converter (FT2232)

    145 parts1

Questions

How big is the Tssop48er PCB?

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tssop48er use?

32 parts, built around the AP1117DG and FT2232D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tssop48er KiCad files?

From the sgenomics/pcbs repository on GitHub, at the commit this page was made from: the board is tssop48er/tssop48er.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tssop48er design in my own project?

Its repository states no licence, so its author keeps all rights: ask sgenomics before reusing the design.