
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Somnos - IoT power measurement and on/off switch for USB devices.
Somnos is an open-source printed circuit board by serweryn617, from the serweryn617/somnos repository on GitHub, published under the MIT licence. It is a 2-layer board of 97.3 × 42 mm with 6 parts on 43 nets, routed with 101 tracks and 2 vias.
Its parts include 4 ICs and 2 connectors. It belongs with the home automation and IoT and sensors and measurement boards and the RP2040 boards of this library.
IoT USB power measurement and on/off switch.
The device has USB C input and standard USB A output.
It is capable of measuring USB bus voltage, current and power as well as switching the power on and off.
When requested, the measurement result can be sent over ethernet (UDP) to a receiver, for example to a PC.
⚠️ Power consumed by the device itself is also included in this measurement, which may be unwanted in some use cases.
Setup build environment:
./project.py submodules
./project.py setupBuild the project:
./project.py build| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | PiPico | somnos_lib:PiPico | U4 |
| 1 | USB_A | somnos_lib:USB A Port | J1 |
| 1 | USB_C_Receptacle_USB2.0 | somnos_lib:USB C Port | J2 |
| 1 | ~ | somnos_lib:INA219 | U2 |
| 1 | ~ | somnos_lib:N-MOS_1 | U3 |
| 1 | ~ | somnos_lib:END28J60 | U1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 97.3 × 42 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the serweryn617/somnos repository on GitHub, at the commit this page was made from: the board is cad/kicad/project/pcb.kicad_pcb and its schematic cad/kicad/project/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).