2 layers101.5 × 53.3 mm
2 layers40.1 × 30 mm
USB232R02
serptail/USB2UART-KiCad-PCB-Design- Size
- 40.1 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 25
- Pads
- 109
- Tracks, vias
- 219, 35
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Jan 2025
- Updated
- 3 Jan 2025
Overview
USB232R02 is an open-source printed circuit board by serptail, from the serptail/USB2UART-KiCad-PCB-Design repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 40.1 × 30 mm with 28 parts on 25 nets, routed with 219 tracks and 35 vias.
It is built around the FT231XQ-R and USBLC6-2SC6. Its parts include 5 capacitors, 5 connectors, 4 resistors, 3 diodes and 2 ICs.
Main components
2README
README.mdUSB2UART-KiCad-PCB-Design
Design files for the USB2UART PCB
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M3 | Mlab_Mechanical:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 100nF | Mlab_C:SMD-0805 | C3, C4, C5 |
| 2 | 270R | Mlab_R:SMD-0805 | R3, R4 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | HEADER_2x03 | Mlab_Pin_Headers:Straight_2x03 | J2, J3 |
| 1 | 10k | Mlab_R:SMD-0805 | R2 |
| 1 | 10nF | Mlab_C:SMD-0805 | C1 |
| 1 | 10uF | Mlab_C:SMD-0805 | C2 |
| 1 | 4k7 | Mlab_R:SMD-0805 | R1 |
| 1 | 750mA | Mlab_F:1812 | F1 |
| 1 | BLM21PG300SN1D | Mlab_L:SMD-0805 | FB1 |
| 1 | FT231XQ | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | GREEN | Mlab_D:LED_1206_2 | D3 |
| 1 | HEADER_2x05_PARALLEL | Mlab_Pin_Headers:Straight_2x05 | J19 |
| 1 | HEADER_2x07 | Mlab_Pin_Headers:Straight_2x07 | J18 |
| 1 | M4 | Diode_SMD:D_SMA | D1 |
| 1 | RED | Mlab_D:LED_1206_2 | D2 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |
Similar boards
- 2 layers68.5 × 53.3 mm
- 4 layers65 × 48 mm
MACHXO2 test
jay-waghmare/MachXO2-KiCad-Board
Custom MachXO2 FPGA Development Board - KiCad Design - Power, Clock, JTAG, LEDs - By Jay Waghmare
52 parts1MIT - 2 layers30 × 30 mm
TFUSBSERIAL01
ThunderFly-aerospace/TFUSBSERIAL01
USB-C to serial converter with Pixhawk telemetry JST-GH connector
39 parts1GPL-3.0 - 2 layers11.8 × 28.8 mm
- 4 layers220 × 100 mm
- 4 layers90.9 × 50.3 mm
- 4 layers65 × 30 mm
Questions
How big is the USB232R02 PCB?
It measures 40.1 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB232R02 use?
28 parts, built around the FT231XQ-R and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB232R02 KiCad files?
From the serptail/USB2UART-KiCad-PCB-Design repository on GitHub, at the commit this page was made from: the board is design/sch_pcb/USB232R02.kicad_pcb and its schematic design/sch_pcb/USB232R02.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB232R02 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).