4 layers67 × 98 mm
SJ-201-R6
MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs
235 parts113
2 layers
Logic probe tiny1614
sergz72/AVR- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 19
- Pads
- 53
- Tracks, vias
- 104, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Nov 2019
- Updated
- 23 Jun 2026
Overview
Logic probe tiny1614 is an open-source printed circuit board by sergz72, from the sergz72/AVR repository on GitHub, published under the MIT licence. It is a 2-layer board with 18 parts on 19 nets, routed with 104 tracks and 5 vias.
It is built around the ATTINY1614-SSN. Its parts include 7 resistors, 5 connectors, 4 diodes, 1 capacitor and 1 IC. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 2 | SW | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 300 | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | ATtiny1614-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | VCC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
Questions
What parts does the Logic probe tiny1614 use?
18 parts, built around the ATTINY1614-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Logic probe tiny1614 KiCad files?
From the sergz72/AVR repository on GitHub, at the commit this page was made from: the board is LogicProbe_Tiny1614.X/KiCad_untested_pcb/logic_probe_tiny1614.kicad_pcb and its schematic LogicProbe_Tiny1614.X/KiCad_untested_pcb/logic_probe_tiny1614.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Logic probe tiny1614 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers23.7 × 25.5 mm
Malenki
MarkR42/malenki-esc
A small electronic speed controller for e.g. tiny fighting robots or other rc models
30 parts7 - 2 layers157.5 × 81.3 mm
- 2 layers179.1 × 67.9 mm
- 2 layers41 × 41 mm
- 2 layers33 × 23.9 mm
ESPTiny1614
tomtor/ESPTiny
KiCad ATtiny84/x14/x02 (SMD) and ESP-01 (ESP 8266) PCB boards
24 parts4GPL-3.0 - 2 layers30.5 × 15.2 mm
Avr attiny1614-mini
vladbelous/avr-attiny1614-mini
AVR attiny1614 (tinyAVR 1-series) mini board
26 parts4 - 2 layers53.5 × 26.5 mm
