2 layers
JONICA
mhechavarria/color-caps-classifier
A project made mostly in python to classifie color caps using OpenCV
59 parts
2 layers
DcMotorDriver
Seqat/KicadProjects- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 33
- Pads
- 50
- Tracks, vias
- 27, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Mar 2026
- Updated
- 6 Mar 2026
Overview
DcMotorDriver is an open-source printed circuit board by Seqat, from the Seqat/KicadProjects repository on GitHub. It is a 2-layer board with 9 parts on 33 nets, routed with 27 tracks and 0 vias.
It is built around the ARDUINO UNO R3 and IRLZ44N. Its parts include 2 resistors, 1 capacitor, 1 diode, 1 transistor and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Motor_DC | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | M1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
Questions
What parts does the DcMotorDriver use?
9 parts, built around the ARDUINO UNO R3 and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DcMotorDriver KiCad files?
From the Seqat/KicadProjects repository on GitHub, at the commit this page was made from: the board is DcMotorDriver/DcMotorDriver.kicad_pcb and its schematic DcMotorDriver/DcMotorDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DcMotorDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask Seqat before reusing the design.
Similar boards
- 2 layers
- 2 layers80 × 80 mm
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14