2 layers141.1 × 126.8 mm
Calculator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
74 parts915
2 layers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 60
- Pads
- 289
- Tracks, vias
- 313, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Mar 2017
- Updated
- 21 Jun 2017
Overview
Prs is an open-source printed circuit board by Sensglove, from the Sensglove/SG repository on GitHub. It is a 2-layer board with 74 parts on 60 nets, routed with 313 tracks and 0 vias.
Its parts include 40 resistors, 24 diodes, 6 ICs and 4 connectors.
README
README.mdSG
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | ~ | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R10, R11, R12, R13, R14, R15, R16, R25, R26, R27, R28, R29, R30 +16 |
| 24 | D_Zener | Diodes_SMD:D_0805 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8 |
| 8 | ~ | Resistors_SMD:R_0805_HandSoldering | R17, R18, R19, R20, R21, R22, R23, R24 |
| 6 | ~ | Housings_DIP:DIP-14_W7.62mm | U1, U2, U3, U4, U5, U6 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | CONN_01X26 | Pin_Headers:Pin_Header_Straight_1x26_Pitch2.54mm | J3 |
| 1 | CONN_02X08 | Pin_Headers:Pin_Header_Straight_2x08_Pitch2.54mm | J2 |
| 1 | CONN_02X16 | Pin_Headers:Pin_Header_Straight_2x16_Pitch2.54mm | J1 |
Questions
What parts does the Prs use?
74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Prs KiCad files?
From the Sensglove/SG repository on GitHub, at the commit this page was made from: the board is projekt interfejsu/prs.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Prs design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sensglove before reusing the design.
Similar boards
- 2 layers49 × 44 mm
Simple keeb reuser
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
74 parts253GPL-3.0 - 2 layers49 × 49 mm
OSBMS Balancer Rev1 sot323
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
74 parts248 - 2 layers72.4 × 72.4 mm
SerialResonantFilter
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
74 parts222 - 2 layers58 × 65 mm
- 2 layers110 × 60 mm
Arduino Spot Welder
KaeptnBalu/Arduino_Spot_Welder_V3
This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.
74 parts207GPL-3.0 - 2 layers51.5 × 89 mm
- 2 layers165.7 × 152.4 mm
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
74 parts184