
Genesis 6button
rfmerrill/genesis_6button
Simple PCB + ATTiny404 code for a 6-button mega drive controller.

Embedded programming in C/C++
MyDevboard is an open-source printed circuit board by Selmakrgzz, from the Selmakrgzz/AVR repository on GitHub. It is a 2-layer board of 20.1 × 37.7 mm with 15 parts on 28 nets, routed with 122 tracks and 9 vias.
It is built around the ATTINY404-SSN and MIC5504-3.3YM5. Its parts include 4 connectors, 3 capacitors, 2 resistors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3, J4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ATtiny404-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | AVR-UPDI-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SW_Omron_B3FS | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J1 |

rfmerrill/genesis_6button
Simple PCB + ATTiny404 code for a 6-button mega drive controller.





custom-ds/Vehicle-Auto-On
With the Arduion programmer board loaded with the jtag2updi software, and the Pin 6 from the Arduino connected to the Reset line on the ATTiny404, you can Build and Program directly inside of the Visual Studio Code.


dselcan/rf-room-sensor-hw
PCB design files and BOM for the RF Room Sensor device
It measures 20.1 × 37.7 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the ATTINY404-SSN and MIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Selmakrgzz/AVR repository on GitHub, at the commit this page was made from: the board is Devboard/Devboard-Design/myDevboard/myDevboard.kicad_pcb and its schematic Devboard/Devboard-Design/myDevboard/myDevboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Selmakrgzz before reusing the design.