2 layers46.4 × 15.2 mm
2 layers57.1 × 24.4 mm
Pcb cia
codepainters/amiga_yafs3Yet Another (Amiga) FDD Swapper
- Size
- 57.1 × 24.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 50
- Pads
- 114
- Tracks, vias
- 120, 32
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Oct 2023
- Updated
- 6 Jan 2024
Overview
Pcb cia is an open-source printed circuit board by codepainters, from the codepainters/amiga_yafs repository on GitHub. It is a 2-layer board of 57.1 × 24.4 mm with 14 parts on 50 nets, routed with 120 tracks and 32 vias.
It is built around the ATTINY404-SSN and BAT54C. Its parts include 6 connectors, 2 capacitors, 1 resistor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY404-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 128Byte 20MHz 256Byte 4KB 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
README
pcb_df1/README.mdDF1 board
Note: this is the PCB rendered from the bottom side.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | ATtiny404-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | Buzzer | amiboot:buzzer | BZ1 |
| 1 | CFG1 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | J3 |
| 1 | CFG2 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | J4 |
| 1 | CFG3 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | J5 |
| 1 | Pins | Package_DIP:DIP-40_W15.24mm | J1 |
| 1 | Socket | Package_DIP:DIP-40_W15.24mm_Socket | J2 |
| 1 | UPDI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
The 12 most common of 14 parts.
More from codepainters/amiga_yafs
1Similar boards
- 2 layers61.7 × 36.8 mm
Genesis 6button
rfmerrill/genesis_6button
Simple PCB + ATTiny404 code for a 6-button mega drive controller.
27 parts5MIT - 2 layers70 × 65.5 mm
- 2 layers67.8 × 83.8 mm
- 2 layers90 × 40 mm
- 2 layers62 × 83 mm
Vehicle Power Switch
custom-ds/Vehicle-Auto-On
With the Arduion programmer board loaded with the jtag2updi software, and the Pin 6 from the Arduino connected to the Reset line on the ATTiny404, you can Build and Program directly inside of the Visual Studio Code.
49 partsGPL-3.0 - 2 layers65.5 × 30 mm
- 2 layers50.8 × 44 mm
Rf room sensor
dselcan/rf-room-sensor-hw
PCB design files and BOM for the RF Room Sensor device
32 partsBSD-3-Clause - 2 layers50 × 50 mm
Questions
How big is the Pcb cia PCB?
It measures 57.1 × 24.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb cia use?
14 parts, built around the ATTINY404-SSN and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb cia KiCad files?
From the codepainters/amiga_yafs repository on GitHub, at the commit this page was made from: the board is pcb_cia/pcb_cia.kicad_pcb and its schematic pcb_cia/pcb_cia.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb cia design in my own project?
Its repository states no licence, so its author keeps all rights: ask codepainters before reusing the design.