2 layers66.9 × 74.5 mm
2 layers69.2 × 54 mm
Plotter
sedelpeuch/MakerPlotterPlotter vertical (dessin sur tableau) : mécanique, électronique et firmware Arduino, projet groupe maker 2021
- Size
- 69.2 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 48
- Pads
- 111
- Tracks, vias
- 102, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 Mar 2021
- Updated
- 20 May 2021
Overview
Plotter is an open-source printed circuit board by sedelpeuch, from the sedelpeuch/MakerPlotter repository on GitHub. It is a 2-layer board of 69.2 × 54 mm with 20 parts on 48 nets, routed with 102 tracks and 15 vias.
Its parts include 13 connectors, 3 capacitors, 1 resistor, 1 diode and 1 switch. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdMakerPlotter
Groupe maker 2021
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 4 | Conn_01x08_Female | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J31, J32, J41, J42 |
| 3 | 100u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2, C3, C4 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J33, J43 |
| 1 | Arduino_Uno_Shield | plotter:Arduino_Uno_Shield | XA1 |
| 1 | Conn_01x02_Female | Connector_BarrelJack:BarrelJack_Horizontal | J7 |
| 1 | LED | LED_THT:LED_D4.0mm | D1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Questions
How big is the Plotter PCB?
It measures 69.2 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Plotter use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Plotter KiCad files?
From the sedelpeuch/MakerPlotter repository on GitHub, at the commit this page was made from: the board is Elec/plotter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Plotter design in my own project?
Its repository states no licence, so its author keeps all rights: ask sedelpeuch before reusing the design.
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772