
Usb micro programmer
jbteja/tj03-usb-micro-programmer
USB Micro Programmer for ESP and Arduino Boards

KiCad project for my room sensor
ConSenBoard is an open-source printed circuit board by sebdehne, from the sebdehne/room-sensor-board repository on GitHub. It is a 2-layer board of 75 × 64 mm with 25 parts on 28 nets, routed with 121 tracks and 0 vias.
It is built around the LM7805CT and 1N4007-T. Its parts include 7 resistors, 5 ICs, 3 capacitors, 3 diodes and 2 crystals. It belongs with the PIC boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | footprints:Resistor_vertical_100mil | R3, R4, R5 | |
| 2 | 0.1µF | footprints:Cap-DIP-2 | C2, C3 |
| 2 | 2.2kΩ | footprints:Resistor_vertical_100mil | R1, R2 |
| 2 | LED | footprints:LED_5mm | D1, D2 |
| 2 | TERM | footprints:TerminalBlock_2 | X1, X2 |
| 1 | 0.33µF | footprints:Cap-DIP-2 | C1 |
| 1 | 10K | footprints:Potensiometer | RV1 |
| 1 | 10kΩ | footprints:Resistor_vertical_100mil | R6 |
| 1 | 1N4007-T | footprints:Resistor_vertical_100mil | D3 |
| 1 | 2N7000GOS-ND | footprints:TO-92_MOSFET | Q1 |
| 1 | 3x AAA | footprints:Battery-3xAAA | BT1 |
| 1 | AM-RT4-433 | footprints:RT4-433 | U3 |
| 1 | Antenna | footprints:Antenna | ANT1 |
| 1 | ChipCap2-SIP | footprints:ChipCap2-SIP | U5 |
| 1 | LM7805CT | footprints:L78M05-TO-220 | U2 |
| 1 | LightSensor | footprints:Resistor_vertical_100mil | R7 |
| 1 | PIC16F690-I/P-ND | footprints:PIC16F690-DIP | U1 |
| 1 | RX433N | footprints:RX433N | U4 |
| 1 | Relay_NO | footprints:Omron-GSNB-1A | K1 |

jbteja/tj03-usb-micro-programmer
USB Micro Programmer for ESP and Arduino Boards

EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.

ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz


profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device

It measures 75 × 64 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the LM7805CT and 1N4007-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sebdehne/room-sensor-board repository on GitHub, at the commit this page was made from: the board is ConSenBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sebdehne before reusing the design.