

Clock divider pcb
Clock divider based on Divide & Conquer from NONLINEARCIRCUITS
- Size
- 38.6 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 141
- Nets
- 115
- Pads
- 418
- Tracks, vias
- 952, 206
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Sep 2025
- Updated
- 9 Dec 2025
Overview
Clock divider pcb is an open-source printed circuit board by Se64s, from the Se64s/eurorack-clock-divider repository on GitHub, published under the MIT licence. It is a 2-layer board of 38.6 × 110 mm with 141 parts on 115 nets, routed with 952 tracks and 206 vias.
It is built around the TL072, MMBT3904 and 1N4148WT, with the 1N4148W among its other parts. Its parts include 62 resistors, 20 diodes, 19 connectors, 15 capacitors and 14 transistors. It belongs with the lEDs and displays boards of this library.
Main components
4TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching Diodes1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
README.mdeurorack-clock-divider
Clock divider based on Divide & Conquer from NONLINEARCIRCUITS.
Parts
141| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23, R25, R26, R28, R29, R31, R32, R34, R35, R37, R38, R40, R41, R43, R44 +12 |
| 18 | AudioJack2_SwitchT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J3, J4, J5, J6, J7, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19 +2 |
| 14 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R24, R27, R30, R33, R36, R39, R42, R45, R48, R51, R54, R57, R60 |
| 14 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D6, D7, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 |
| 14 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14 |
| 12 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R5, R7, R8, R10, R12, R13, R15, R17, R18, R20 |
| 10 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R6, R9, R11, R14, R16, R19 |
| 5 | 4013 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3, U4, U5 |
| 4 | 1N4148WT | Diode_SMD:D_SOD-523 | D2, D3, D4, D5 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C5 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C1, C3 |
| 2 | 1N4148W | Diode_SMD:D_SOD-123 | D8, D21 |
| 2 | FerriteBead_Small | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1, FB2 |
| 2 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8, U9 |
| 1 | 4024 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | 4070 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U7 |
| 1 | POWER | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
Similar boards
- 2 layers109.4 × 108.5 mm

- 2 layers80.9 × 108.2 mm

- 4 layers133.9 × 165.1 mm

Main VCO board
JordanAceto/micro_ox
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
295 parts8CC-BY-4.0 - 2 layers48.3 × 99.1 mm

Modulation source
JordanAceto/modulation_source
Eurorack compatible pcb with sine/square VCLFO, white and pink noise, and sample & hold
95 parts6 - 4 layers71.1 × 99.1 mm

- 4 layers87.6 × 84 mm

Flashover
Cherry-Blossom-Development/GreywireStudio
GreywireStudio - a combined software/hardware product
95 parts - 4 layers100 × 100 mm

TouchSynth
cpldcpu/TouchSynth
Analog Monophonic Synthesizer with a touch keyboard. Controller by CH32V00x
246 partsMIT - 2 layers56 × 85.4 mm

FU-3
soggybag/FU-3
An octave / "tripler" distortion with a big two-knob tone stage: the Distort-o-matic XI (Stompboxology Vol. 13 No.
84 parts
Questions
How big is the Clock divider pcb PCB?
It measures 38.6 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clock divider pcb use?
141 parts, built around the TL072, MMBT3904, 1N4148WT and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clock divider pcb KiCad files?
From the Se64s/eurorack-clock-divider repository on GitHub, at the commit this page was made from: the board is pcb/clock-divider-pcb.kicad_pcb and its schematic panel/clock-divider-panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clock divider pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).