2 layers42 × 67 mm
2 layers
Base2040
scottcjx/base2040- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 50
- Pads
- 105
- Tracks, vias
- 65, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Dec 2023
- Updated
- 7 Dec 2023
Overview
Base2040 is an open-source printed circuit board by scottcjx, from the scottcjx/base2040 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 19 parts on 50 nets, routed with 65 tracks and 0 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 11 capacitors, 5 resistors, 2 ICs and 1 crystal. It belongs with the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R2, R5 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 1 | 12 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1K (NC) | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
Questions
What parts does the Base2040 use?
19 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base2040 KiCad files?
From the scottcjx/base2040 repository on GitHub, at the commit this page was made from: the board is hdk/base2040/base2040.kicad_pcb and its schematic hdk/base2040/base2040 - Copy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base2040 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
