2 layers389 × 136.2 mm
2 layers60.3 × 57.8 mm
Ecc88-test setup
schenkmi/electronic-projects6misc electronic projects
- Size
- 60.3 × 57.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 9
- Pads
- 46
- Tracks, vias
- 29, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Oct 2020
- Updated
- 31 Oct 2026
Overview
Ecc88-test setup is an open-source printed circuit board by schenkmi, from the schenkmi/electronic-projects repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 60.3 × 57.8 mm with 27 parts on 9 nets, routed with 29 tracks and 1 via.
Its parts include 14 connectors, 6 capacitors, 2 resistors and 1 IC. It belongs with the audio and music boards of this library.
README
README.mdelectronic-projects
misc electronic projects
History
2026.09.19
pre-amp-ECC86/kicad/psu-v6
Large PCB PSU for ECC86 with high side switch. Support LT3080 and LM317. Fix Drain/Source.
2026.09.02
pre-amp-ECC86/kicad/psu-v5
Large PCB PSU for ECC86 with high side switch. Support LT3080 and LM317
2026.08.26
pre-amp-ECC86/kicad/psu-v4
Large PCB PSU for ECC86 without relais. Support LT3080 and LM317
2026.08.23
input-sel-attenuator/software/v9
Power up timer to 64ms wait till voltage is stabilized
2026.08.10
pre-amp-ECC86/kicad/psu-v3
Large PCB PSU for ECC86
2026.08.01
pre-amp-ECC86/kicad/psu-v2
Shrinked and optimized PSU for ECC86
2026.07.22
pre-amp-ECC86/kicad/psu-v1
First version of PSU for ECC86
2026.07.12
pre-amp-ECC86/kicad/v1
First version of ECC86 based pre-amplifier
spdif-recv-ak4118-ak4137/software/spdif-recv-ak4118-ak4137-v4.X
Updated software for V4 PCB
2026.06.05
dac-pcm1702-v1/kicad-psu-v8/
DC/DC for +5V digital path
dac-pcm1702-v1/kicad-asrc-v14
PCB LED fix External LED support
spdif-recv-ak4118-ak4137/kicad/v4
External LED support Change one LDO to TLV1117-3.3 due to power dissipation
2026.05.28
dac-pcm1702-v1/kicad-asrc-v13
PCB re-design with fixed LED ordering
2026.05.27
pre-amp-26A7/ltspice/v2/
New CCS simulation with smaller FETs
2026.05.26
dac-pcm1702-v1/software/spdif-recv-asrc-4392-v12.X
New software for SPDIF ASRC receiver including UART and IR
2026.05.16
dac-pcm1702-v1/kicad-asrc-v12
PSU re-design, UART for debugging, I2C debugging, IR
spdif-recv-ak4118-ak4137/kicad/v3
Add IR support
2026.05.10
spdif-recv-cs8416-ak4137/kicad/v7
Improved power supply, I2S debug, Serial console
spdif-recv-ak4118-ak4137/kicad/v2
Small redesign
2026.04.25
spdif-recv-ak4118-ak4137/kicad/v1
Finalize and ordered
pre-amp-26A7/kicad/v2
Finalize and ordered
2026.03.29
pre-amp-26A7/kicad/v1
Finalize and ordered v1
2026.03.28
lv-psu-dcdc/kicad/fixed-v3
Better thermal management for DC/DC
lv-lownoise-psu/kicad/v7-dcdc-large-cap
Better thermal handling on DC/DC
input-sel-attenuator/kicad/v9-10k-47k
Changed footprint for L1 and C1
2026.03.11
lv-psu-dcdc/kicad/fixed-v2
Eval board with different inductors
hv-psu-discrete/kicad/maida-lt3080-v5
HV PSU with DC/DC for +5V output
2026.03.05
lv-lownoise-psu/kicad/v6-dcdc-large-cap
Finalize v6 with large reservoir cap
2026.02.25
hv-psu-discrete/kicad/maida-lt3080-v5-26A7GT
HV PSU for 26A7 pre-amp
2026.01.13
input-sel-attenuator/software/ir-debug-v3
Update MCC generated code
dac-pcm1792a/software/asrc-pcm1792a-v4.X
Update MCC generated code
dac-pcm1702-v1/software/v8
Update MCC generated code
spdif-recv-cs8416-ak4137/software/spdif-recv-cs8416-ak4137-v5.X
Update MCC generated code
input-sel-attenuator/software/v9
Update MCC generated code
rpi-hat-spdif/kicad/V9
RPI HAT SPDIF Output increase hole diameter to 3.2mm
rpi-hat-spdif/kicad/V9-min
RPI HAT SPDIF Output minized PCB increase hole diameter to 3.2mm
2026.01.01
adapter/spdif/kicad/v2
LVDS SPDIF XMIT with rotated connector
adapter/spdif/kicad/v2b
LVDS SPDIF XMIT with standard connector
rpi-hat-spdif/kicad/V7-min
RPI HAT SPDIF Output minized PCB
rpi-hat-spdif/kicad/V8
RPI HAT SPDIF Output new PCB
2025.12.20
adapter/spdif/kicad/v1
Finalize v1 LVDS SPDIF XMIT
rpi-hat-spdif/kicad/v6
RPI HAT SPDIF Output
rpi-hat-spdif/kicad/v6-min
RPI HAT SPDIF Output minimized
2025.12.08
pre-amp-ECC88/kicad/v9
Finalize and ordered v9
2025.09.29
retro/c64-user-port-led
Finalize v1 of C64 user port LED
2025.09.28
dac-pcm1704/kicad/dac-df1706-pcm1704-v2
Finalize and ordered v2
2025.09.21
dac-pcm1704/kicad/dac-pcm1704-v5
Finalize and ordered v5
dac-pcm1702-v1/kicad-i2s-nos-v7
Finalize and ordered v7
dac-pcm1792a/kicad/v6/
Finalize and ordered v6
2025.09.13
input-sel-attenuator/software/ir-debug-v2
input-sel-attenuator/software/v8
V2.5 2025.09.12 Shiny new push button and saving handling Use volume when doing channel switch.
2025.09.07
lv-lownoise-psu/kicad/v5-dcdc
Finalize and ordered v5
lv-lownoise-psu/kicad/v5-dcdc-large-cap
Finalize and ordered v5 with large reservoir cap
2025.08.25
lt1115-phono-mm-mc/kicad/v6
Finalize and ordered v6
2025.08.23
dac-pcm1702-v1/kicad-psu-v7
Finalize and ordered v7
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x01 | Connector_Pin:Pin_D1.0mm_L10.0mm | J1, J2, J3, J4, J7, J11, J12, J14 |
| 4 | Conn_01x01 | Connector_Pin:Pin_D1.3mm_L11.0mm | J5, J6, J9, J10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C4, C5, C11 |
| 2 | 220uF/50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C3 |
| 2 | 680R/0.6W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00012_1x02_P5.00mm_Horizontal | J8, J13 |
| 1 | 100nF | Capacitor_THT:C_Rect_L16.5mm_W5.0mm_P15.00mm_MKT | C2 |
| 1 | ECC88 | w_vacuum:socket_gzc9-b | U1 |
Questions
How big is the Ecc88-test setup PCB?
It measures 60.3 × 57.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ecc88-test setup use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ecc88-test setup KiCad files?
From the schenkmi/electronic-projects repository on GitHub, at the commit this page was made from: the board is ECC88-test-setup/kicad/v1/ecc88-test-setup.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ecc88-test setup design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from schenkmi/electronic-projects
12- 2 layers159.9 × 99.9 mm
Hv power supply t reg v2
schenkmi/electronic-projects
misc electronic projects
107 parts6CERN-OHL-W-2.0 - 2 layers159.9 × 99.9 mm
- 2 layers159.9 × 99.9 mm
- 2 layers159.9 × 99.9 mm
- 2 layers159.9 × 99.9 mm
- 4 layers97.8 × 69.9 mm
- 2 layers159.5 × 99.6 mm
- 2 layers159.7 × 99.6 mm
- 2 layers159.5 × 99.6 mm
- 2 layers159.5 × 99.6 mm
- 2 layers159.7 × 99.6 mm
Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223