Skip to the content
4 layers45 × 45 mmPulse gen, the printed circuit board in 3D

TDR pulse generator

Size
45 × 45 mm
Copper layers
4
Thickness
1.65 mm
Parts
26
Nets
18
Pads
68
Tracks, vias
107, 52
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Aug 2024
Updated
5 May 2025

Overview

Pulse gen is an open-source printed circuit board by sbstnh, from the sbstnh/tdr-pulse-generator repository on GitHub. It is a 4-layer board of 45 × 45 mm with 26 parts on 18 nets, routed with 107 tracks and 52 vias.

It is built around the 74AC14SC. Its parts include 8 resistors, 6 capacitors, 3 connectors, 2 ICs and 1 diode.

Main components

1

README

README.md

TDR pulse generator

This repository contains the PCB design files (KiCAD 8) of a simple TDR pulse generator.

TDR pulse generator PCB rendering

Introduction

Almost a decade ago W2AEW posted a video on his YouTube channel showing a cheap and easy to build pulse generator for time domain reflectometry (TDR), consisting of only a simple hex inverter with schmitt-trigger inputs 74AC14 and a few passive components. The schematic looks something like this:

Schematic

It consists of a schmitt-trigger oscillator and a few inverters used as a driver with a (somewhat) fast rise time.

This repository contains an implementation of such a circuit.

Results

Screenshot of the rising edge

For the test I used my Siglent SDS2000X Plus scope (500MHz, 800ps rise time typical @ 50 Ohm) which has to stretch its legs for this one: I measured a respectable rise time of about 960ps. In his video, W2AEW measured something like 2ns of rise time for his circuit using DIP packaged hex inverter. Both his and my variant show a noticable ringing.

Credits

Circuit presented by W2AEW on his youtube channel. The video can be found here: https://www.youtube.com/watch?v=9cP6w2odGUc.

Further information

More details are available on my personal site https://sebastianharnisch.de.

Disclaimer

This repository all its Content is provided "AS IS" without any warranty whatsoever.

Parts

26
QtyValueFootprintReferences
5220Resistor_SMD:R_0805_2012MetricR2, R3, R4, R5, R6
4M3MountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
2100nCapacitor_SMD:C_0805_2012MetricC5, C6
11Resistor_SMD:R_0805_2012MetricR7
110uCapacitor_SMD:C_1206_3216MetricC4
110uCapacitor_SMD:C_0805_2012MetricC7
1120RInductor_SMD:L_0805_2012MetricFB1
11kResistor_SMD:R_0805_2012MetricR8
11uCapacitor_SMD:C_0805_2012MetricC2
147nCapacitor_SMD:C_0805_2012MetricC1
16.8kResistor_SMD:R_0805_2012MetricR1
174AC14Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
1Conn_CoaxialConnector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_HorizontalJ3
1LD1117S33TR_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1LEDLED_SMD:LED_0805_2012MetricD1
1Screw_Terminal_01x02Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_HorizontalJ1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1USB_BConnector_USB:USB_B_Lumberg_2411_02_HorizontalJ2

Similar boards

  • 6 layers285 × 236 mmRa9704, the printed circuit board in 3D

    Ra9704

    Coin-OpCollection/Development-Documentation

    This repository contains technical information, documentation, and reverse-engineering details for the base platform systems of FPGA implementations released by Coin-Op Collection.

    228 parts11
  • 4 layers68.6 × 58.4 mmPlant combined, the printed circuit board in 3D

    Plant combined

    theblinkingman/plant-waterer

    TDR sensor to water a plant automatically

    74 parts9
  • 2 layers95 × 55 mmScopetester, the printed circuit board in 3D

    Scopetester

    cosenmarco/scopetester

    An Open Hardware project for a small Oscilloscope tester with features like the Hameg HZ-60

    55 parts1
  • 2 layers80 × 50 mmFreeDSPx ADAPTER, the printed circuit board in 3D

    FreeDSPx ADAPTER

    freeDSP/freeDSP-StdConnectorAdapter

    Adapter of the old freeDSP Classic connector to the new freeDSP standard connector.

    89 partsGPL-3.0
  • 2 layers33 × 48 mmPropagation delay led pulser, the printed circuit board in 3D

    Propagation delay led pulser

    jhugon/kicad_propagation_delay_led_pulser

    Uses propagation delay to create a few ns long pulse

    15 parts
  • 4 layers170 × 150 mmSerrasoid TRX, the printed circuit board in 3D

    Serrasoid TRX

    kazushinjo/Serrasoid_TRX_29M

    29MHz FM 10W transceiver with Serrasoid modulation

    333 partsGPL-3.0
  • 6 layers285 × 236 mmRa9704, the printed circuit board in 3D

    Ra9704

    psomashekar/Development-Documentation

    Please consider supporting these and future projects by joining the Coin-Op Collection Patreon.

    228 parts

Questions

How big is the Pulse gen PCB?

It measures 45 × 45 mm and has 4 copper layers, 1.65 mm thick.

What parts does the Pulse gen use?

26 parts, built around the 74AC14SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pulse gen KiCad files?

From the sbstnh/tdr-pulse-generator repository on GitHub, at the commit this page was made from: the board is pcb/pulse_gen.kicad_pcb and its schematic pcb/pulse_gen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pulse gen design in my own project?

Its repository states no licence, so its author keeps all rights: ask sbstnh before reusing the design.