4 layers30 × 30 mm
ReCamera S101 v1.1
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
92 parts495Apache-2.0
4 layers
UpDownConverter
savagesmc/updownconvUp/Down converter design (schematic etc...)
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 86
- Pads
- 321
- Tracks, vias
- 38, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Aug 2023
- Updated
- 9 Oct 2023
Overview
UpDownConverter is an open-source printed circuit board by savagesmc, from the savagesmc/updownconv repository on GitHub. It is a 4-layer board with 92 parts on 86 nets, routed with 38 tracks and 0 vias.
It is built around the HMC1118LP3DE, ADE-2ASK+ and ADRF5040BCPZ-R7, with the BPF-A410+ and SN74S124D among its other parts. Its parts include 36 capacitors, 36 inductors, 8 resistors, 8 ICs and 3 connectors.
Main components
5
HMC1118LP3DE
LFCSP-16(3x3)-40℃~+85℃ 2dB 3V~3.6V 50dB 9kHz~13GHz Integrated impedance matching network LFCSP-16(3x3) RF Switches ROHSAnalog DevicesRF SwitchesADE-2ASK+
SMD-6P,7.9x5.6mm-40℃~+85℃ 0MHz~1GHz 1 1MHz~1GHz 1MHz~1GHz 1dBm 5.4dB、6.8dB、7.83dB 50dBm 64.1dB 67.9dB SMD-6P,7.9x5.6mm RF Mixers ROHSMini-CircuitsRF Mixers
ADRF5040BCPZ-R7
LFCSP-24(4x4)-40℃~+85℃ 0.8dB 3.3V 34dB 37dBm 9kHz~12GHz LFCSP-24(4x4) RF Switches ROHSAnalog DevicesRF SwitchesBPF-A410+
SMD-18P,34.5x18.5mm-40℃~+85℃ 2.04dB、2.12dB、2.24dB、2.51dB、2.61dB 365MHz~455MHz 410MHz 50Ω Bandpass SMD-18P,34.5x18.5mm RF Filters ROHSMini-CircuitsRF Filters
SN74S124D
SOIC-160℃~+70℃ 1Hz~60MHz 4.75V~5.25V SOIC-16 Voltage Controlled Oscillators (VCOs) ROHSTexas InstrumentsVoltage Controlled Oscillators (VCOs)
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 15 nH | Inductor_SMD:L_1206_3216Metric | L20, L22, L24, L26, L29, L31, L33, L35 |
| 6 | 12 nH | Inductor_SMD:L_1206_3216Metric | L21, L23, L25, L30, L32, L34 |
| 6 | 50 Ohms | Resistor_SMD:R_1206_3216Metric | R3, R4, R5, R6, R7, R8 |
| 6 | 8.2 pF | Capacitor_SMD:C_1206_3216Metric | C21, C23, C25, C30, C32, C34 |
| 5 | HMC1118LP3DE | Mouser:QFN50P300X300X95-17N-D | IC2, IC2, IC3, IC4, IC6 |
| 4 | 22 nH | Inductor_SMD:L_1206_3216Metric | L19, L27, L28, L36 |
| 4 | 330 nH | Inductor_SMD:L_1206_3216Metric | L2, L4, L6, L8 |
| 4 | 4.7 pF | Capacitor_SMD:C_1206_3216Metric | C19, C27, C28, C36 |
| 4 | 5.6 pF | Capacitor_SMD:C_1206_3216Metric | C22, C24, C31, C33 |
| 4 | 56 nH | Inductor_SMD:L_1206_3216Metric | L11, L13, L15, L17 |
| 3 | 1.5 uH | Inductor_SMD:L_1206_3216Metric | L3, L5, L7 |
| 3 | 100 nH | Inductor_SMD:L_1206_3216Metric | L12, L14, L16 |
| 3 | 180 pF | Capacitor_SMD:C_1206_3216Metric | C3, C5, C7 |
| 3 | 33 pF | Capacitor_SMD:C_1206_3216Metric | C12, C14, C16 |
| 3 | PCB.SMAFRA.HT | Mouser:PCBSMAFRAHT | J2, J3, J5 |
| 2 | 100 pF | Capacitor_SMD:C_1206_3216Metric | C1, C9 |
| 2 | 18 pF | Capacitor_SMD:C_1206_3216Metric | C10, C18 |
| 2 | 180 nH | Inductor_SMD:L_1206_3216Metric | L10, L18 |
| 2 | 2.7 uH | Inductor_SMD:L_1206_3216Metric | L1, L9 |
| 2 | 50 Ohms | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 56 pF | Capacitor_SMD:C_1206_3216Metric | C13, C15 |
| 2 | 6.8 pF | Capacitor_SMD:C_1206_3216Metric | C26, C35 |
| 2 | 6.8 pf | Capacitor_SMD:C_1206_3216Metric | C20, C29 |
| 2 | 680 pF | Capacitor_SMD:C_1206_3216Metric | C4, C6 |
| 1 | 68 pF | Capacitor_SMD:C_1206_3216Metric | C17 |
| 1 | 68 pf | Capacitor_SMD:C_1206_3216Metric | C11 |
| 1 | 820 pF | Capacitor_SMD:C_1206_3216Metric | C8 |
| 1 | 820 pf | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | ADE-2ASK+ | Mouser:ADE2ASK | IC1 |
| 1 | ADRF5040BCPZ-R7 | Mouser:QFN50P400X400X90-25N-D | IC5 |
| 1 | BPF-A410+ | Mouser:BPFA410 | FL1 |
| 1 | SN74S124D | Mouser:SOIC127P600X175-16N | IC7 |
Questions
What parts does the UpDownConverter use?
92 parts, built around the HMC1118LP3DE, ADE-2ASK+, ADRF5040BCPZ-R7 and BPF-A410+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UpDownConverter KiCad files?
From the savagesmc/updownconv repository on GitHub, at the commit this page was made from: the board is UpDownConverter.kicad_pcb and its schematic Mixer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UpDownConverter design in my own project?
Its repository states no licence, so its author keeps all rights: ask savagesmc before reusing the design.
Similar boards
- 4 layers36.8 × 57.2 mm
Vsf aic8800m40b
vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
92 parts341Apache-2.0 - 4 layers33.8 × 38 mm
- 4 layers43.6 × 32.9 mm
RVL PMS HW2
Gmanmodz/RVL-Power-Management-System
A complete battery management and custom regulator system for a Wii portable
92 parts77 - 4 layers121.9 × 44.4 mm
- 4 layers99.6 × 99.8 mm
- 4 layers85.6 × 54 mm
SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
92 parts39 - 4 layers76.3 × 88.1 mm
