Skip to the content
2 layers115.7 × 62.5 mmBaseConversionRevB, the printed circuit board in 3D
Size
115.7 × 62.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
42
Pads
213
Tracks, vias
374, 190
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Oct 2026
Updated
14 Oct 2026

Overview

BaseConversionRevB is an open-source printed circuit board by sarocs, from the sarocs/Atanasoff-Berry-Computer repository on GitHub. It is a 2-layer board of 115.7 × 62.5 mm with 40 parts on 42 nets, routed with 374 tracks and 190 vias.

It is built around the AT28C256-15PU. Its parts include 14 connectors, 5 capacitors, 5 resistors, 5 ICs and 5 diodes.

Main components

1

README

README.md

sdmay26-12

Team Website: https://sdmay26-12.sd.ece.iastate.edu/

Pre-commit

To ensure standard formatting across VHDL files, pre-commit is confirugred with a VHDL linting plugin. Passing pre-commit is required for merge requests to be merged. To get set up for pre-commit make sure Python is installed. run pip install pre-commit. Once in the repository you should run pre-commit install.

Parts

40
QtyValueFootprintReferences
6Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4, J5, J6, J7, J8, J9
5330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4, R5
5AT28C256-15PUfootprints:28P6_ATM_EDITTEDU1, U2, U3, U4, U5
5CCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2, C3, C4, C5
5Conn_01x01_PinConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ10, J11, J12, J13, J14
5LEDLED_THT:LED_D5.0mmD1, D2, D3, D4, D5
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
2Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3
1LOGOfootprints:TwoCrownsG***
1LOGOfootprints:ABCrewLogoG***

More from sarocs/Atanasoff-Berry-Computer

10
  • 2 layers320 × 200 mmMemoryDrumRevB, the printed circuit board in 3D

    MemoryDrumRevB

    sarocs/Atanasoff-Berry-Computer

    153 parts
  • 2 layers460.4 × 308.4 mmMotherBoard, the printed circuit board in 3D

    MotherBoard

    sarocs/Atanasoff-Berry-Computer

    146 parts
  • 2 layers152.9 × 304.8 mmAbcBtooth, the printed circuit board in 3D

    AbcBtooth

    sarocs/Atanasoff-Berry-Computer

    129 parts
  • 2 layers167.6 × 167.6 mmControl system, the printed circuit board in 3D

    Control system

    sarocs/Atanasoff-Berry-Computer

    105 parts
  • 2 layers132.5 × 99.2 mmControlPanelRevA, the printed circuit board in 3D

    ControlPanelRevA

    sarocs/Atanasoff-Berry-Computer

    79 parts
  • 2 layers132.5 × 99.2 mmControlPanelRevB, the printed circuit board in 3D

    ControlPanelRevB

    sarocs/Atanasoff-Berry-Computer

    79 parts
  • 2 layers100 × 100 mmAbcPcClk, the printed circuit board in 3D

    AbcPcClk

    sarocs/Atanasoff-Berry-Computer

    60 parts

Similar boards

  • 4 layers101.6 × 76.2 mm8051dumper, the printed circuit board in 3D

    8051dumper

    JohnDMcMaster/8051dumper

    by NF6X. Forked from: https://gitlab.com/NF6X_Retrocomputing/8051dumper

    41 parts27
  • 2 layers99.9 × 64 mmMsx eeprom, the printed circuit board in 3D

    Msx eeprom

    costarc/msxcart_flash32k

    A MSX 32K EEPROM AT28C256 cartridge rewritable by software.

    99 parts22MIT
  • 2 layers40.6 × 68.6 mmEeprom programmer, the printed circuit board in 3D

    Eeprom programmer

    yoppeh/eeprom-programmer

    An Arduino Nano sketch and schematic for an Atmel 28cx programmer.

    7 parts10MIT
  • 4 layers100 × 100 mmRosco 6502, the printed circuit board in 3D

    Rosco 6502

    rosco-6502/rosco_6502

    Design, documentation and software for the Really Old School Computer (6502)

    62 parts8MIT
  • 2 layers99.5 × 70 mmZed-80, the printed circuit board in 3D

    Zed-80

    Gnardisitor/zed-80

    Simple Z80 computer based on Grant Searle's Z80 computer.

    33 parts
  • 2 layers99 × 96.5 mm6502-pactvm v01, the printed circuit board in 3D

    6502-pactvm v01

    napicella/8-bit-computer

    Resources for an 8 bit computer based on the 6502 micro processor

    15 parts
  • 4 layers160 × 100 mmRosco m68k, the printed circuit board in 3D

    Rosco m68k

    rosco-m68k/rosco_m68k

    Design, documentation and software for the Really Old School Computer (M68K)

    84 parts200
  • 2 layers116.8 × 147.3 mmCpu, the printed circuit board in 3D

    Cpu

    eshazen/retro-25

    Retro-tech HP-25 calculator clone using Z80

    52 parts33

Questions

How big is the BaseConversionRevB PCB?

It measures 115.7 × 62.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BaseConversionRevB use?

40 parts, built around the AT28C256-15PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BaseConversionRevB KiCad files?

From the sarocs/Atanasoff-Berry-Computer repository on GitHub, at the commit this page was made from: the board is KiCAD/base_conversion/BaseConversionRevB/BaseConversionRevB.kicad_pcb and its schematic KiCAD/Card Reader/abcBtooth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BaseConversionRevB design in my own project?

Its repository states no licence, so its author keeps all rights: ask sarocs before reusing the design.