
Esp32-wroom timer
AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer

Gift board for friend of her cat. Plays voice clip
Basil Gift is an open-source printed circuit board by sarahGruber6, from the sarahGruber6/Basil_Gift repository on GitHub. It is a 2-layer board of 112 × 97.5 mm with 43 parts on 62 nets, routed with 1,559 tracks and 141 vias.
It is built around the TAS2563RPPT and AMS1117. Its parts include 21 capacitors, 5 resistors, 4 ICs, 2 connectors and 1 switch. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C10, C12, C14, C16, C18, C20, C21, C22, C25 |
| 7 | .1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C7, C11, C13, C15, C17, C19 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP4, TP7, TP8, TP9, TP10 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5, U6 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 1 | 1uH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 693072010801 | Kitty:693072010801 | J2 |
| 1 | Activate | Button_Switch_SMD:SW_SPST_EVQP0 | SW1 |
| 1 | CMS-131304-SMT-TR | Kitty:CMS131304SMTTR | LS1 |
| 1 | LOGO | LOGO | G*** |
| 1 | STM32L051C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | TAS2563RPPT | Kitty:RPP0032B-MFG | U4 |
| 1 | UJC-H-G1-SMT-P6-TR-67 | Kitty:UJCHG1SMTP6TR67 | J3 |

AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer




uli/basicengine-pcb
Schematics and PCB layout for the BASIC Engine home computer



MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
It measures 112 × 97.5 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the TAS2563RPPT and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sarahGruber6/Basil_Gift repository on GitHub, at the commit this page was made from: the board is Basil_Gift.kicad_pcb and its schematic Basil_Gift.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sarahGruber6 before reusing the design.