Skip to the content
4 layers78 × 77.2 mmPF233-LB1 routed, the printed circuit board in 3D

PF233-LB1 routed

sappystick/ARX
Size
78 × 77.2 mm
Copper layers
4
Thickness
0.8 mm
Parts
81
Nets
71
Pads
299
Tracks, vias
1,044, 186
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Oct 2026
Updated
30 Oct 2026

Overview

PF233-LB1 routed is an open-source printed circuit board by sappystick, from the sappystick/ARX repository on GitHub. It is a 4-layer board of 78 × 77.2 mm with 81 parts on 71 nets, routed with 1,044 tracks and 186 vias.

It is built around the 74AHCT1G125SE.

Main components

1

README

README.md

Arx: PHI-FOLD 233 detector head (design repo)

Everything from the engineering sessions in one place: parametric CAD generators, PCB tooling, simulations, verified results, documents, ready-made prompts and Claude Code / Cowork configuration.

Quick start (Claude Code or a plain terminal)

text
pip install -r requirements.txt
make setup
make verify-quick        # about 3 minutes: v5 cylinder + base plate + parts + 47 checks + transmit-stage and field simulation
python3 tests/regress.py

make verify-full (incl. make audit-system: wiring audit, stress table, stack-up, voxel interference) adds the receiver simulations, hood, yoke and the display-board routing and Gerbers. Then paste prompts/P00_BOOTSTRAP_CLAUDE_CODE.md into Claude Code.

What is where

  • docs/: DESIGN_STATE (current design), CORRECTIONS (what was wrong), ASSUMPTIONS, OPEN_ITEMS, PROCESS, CONVENTIONS, HISTORY, figures, reference photos.
  • prompts/: P00-P10 for Claude Code (the next engineering tasks), prompts/cowork/C00-C06 for Cowork.
  • .claude/: slash commands (/status /verify /newpart /route /release), skills, subagents, settings. CLAUDE.md at the root is the project memory.
  • src/: generators and simulations (current) + archive/. data/: seeds, legacy boards, results, Gerbers. stl/: curated final STLs with hashes (formers are generated: make formers-print).
  • scripts/push_to_github.sh: publish to GitHub yourself (plain git; STLs are ordinary binary files, all under GitHub's 100 MB limit).

Honest scope

Nothing here has been printed, wound, assembled or measured. Performance numbers are modeled from stated assumptions. SB1R-QA/QB, LB1 and CB1D now have KiCad files and Gerbers that pass the repo's own checks and independent DRC; none has been opened in KiCad or a CAM viewer. The rigid-flex spine, CAM/KiCad verification and the DSP are open; the upper assembly (S-stem, trigger, battery dock, twin-cavity shaft) is generated and checked on its meshes but not printed (docs/OPEN_ITEMS.md, docs/design/UPPER_ASSEMBLY_v1.md).

Parts

81
QtyValueFootprintReferences
66SK6812 MINI-E RGBLED_SMD:LED_SK6812MINI-E_3.2x2.8mmLD1, LD2, LD10, LD11, LD12, LD13, LD14, LD15, LD16, LD17, LD18, LD19, LD20, LD21, LD22, LD23 +50
11100nCapacitor_SMD:C_0603_1608MetricCL1, CL2, CL3, CL4, CL5, CL6, CL7, CL8, CL9, CL10, CL11
110u 16VCapacitor_SMD:C_1210_3225MetricCB
133RResistor_SMD:R_0603_1608MetricRS
174AHCT1G125Package_TO_SOT_SMD:SOT-23-5U1
1to CB1D: +5V, LED_IN, GND, GNDConnector:Wire_pads_1x4_P2.54mmJLB

More from sappystick/ARX

11
  • 4 layers70 × 70 mmPF233-CB1, the printed circuit board in 3D

    PF233-CB1

    sappystick/ARX

    58 parts
  • 4 layers28 × 224 mmPF233-PB1, the printed circuit board in 3D

    PF233-PB1

    sappystick/ARX

    48 parts
  • 4 layers70 × 70 mmPF233-PB1R, the printed circuit board in 3D

    PF233-PB1R

    sappystick/ARX

    39 parts
  • 4 layers28 × 136 mmPF233-PM1, the printed circuit board in 3D

    PF233-PM1

    sappystick/ARX

    28 parts
  • 2 layers23 × 11 mmTXJ1, the printed circuit board in 3D

    TXJ1

    sappystick/ARX

    16 parts
  • 4 layers24 × 60 mmPF233-HB1, the printed circuit board in 3D

    PF233-HB1

    sappystick/ARX

    12 parts
  • 4 layers230 × 228 mmSB1R QA, the printed circuit board in 3D

    SB1R QA

    sappystick/ARX

    9 parts

Similar boards

  • 4 layers241.2 × 327.2 mmCyclic, the printed circuit board in 3D

    Cyclic

    tpcarlson/synth-diy

    Mostly Eurorack projects

    439 parts107
  • 2 layers40 × 18.5 mmOpendrain, the printed circuit board in 3D

    Opendrain

    darthcloud/BlueRetroHW

    Kicad for BlueRetro project

    78 parts61
  • 2 layers40.1 × 49.3 mmBig Honking Button, the printed circuit board in 3D

    Big Honking Button

    wntrblm/Big_Honking_Button

    A simple Eurorack sampler and performance module in a silly package.

    54 parts60
  • 2 layers68 × 100 mmKeyboard featherwing, the printed circuit board in 3D

    Keyboard featherwing

    arturo182/keyboard_featherwing_hw

    The Keyboard FeatherWing is an easy way to add a handheld Qwerty keyboard and a 2.6” color display (+ more) to your project! It fits well in your hands and is great for typing with your thumbs, early 2000s-style.

    58 parts43
  • 2 layers53 × 53 mmKeypad, the printed circuit board in 3D

    Keypad

    realworldpixel/home-assistant-keypad

    A 9-key macro keypad for Home Assistant, running ESPHome. Every key is RGB backlit, and comes in two variants: one that sits on a desk and one that mounts on a wall, with magnets or screws.

    36 parts29
  • 2 layers45.5 × 26.2 mmP1-wifi gateway22v4jlc, the printed circuit board in 3D

    P1-wifi gateway22v4jlc

    romix123/P1-wifi-gateway

    Deze software brengt verschillende componenten bij elkaar in een handzaam pakket.

    27 parts27
  • 2 layers65 × 85 mmOCXOBoard, the printed circuit board in 3D

    OCXOBoard

    gibbi/PicoGPSDO

    Hardware and Software for the PicoGPSDO

    24 parts23
  • 2 layersTopBoard, the printed circuit board in 3D

    TopBoard

    Libre-Talk/Wave

    Smart Speaker satellite

    184 parts22

Questions

How big is the PF233-LB1 routed PCB?

It measures 78 × 77.2 mm and has 4 copper layers, 0.8 mm thick.

What parts does the PF233-LB1 routed use?

81 parts, built around the 74AHCT1G125SE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PF233-LB1 routed KiCad files?

From the sappystick/ARX repository on GitHub, at the commit this page was made from: the board is data/kicad/PF233-LB1_routed.kicad_pcb and its schematic data/kicad/sch/PF233-AB1A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PF233-LB1 routed design in my own project?

Its repository states no licence, so its author keeps all rights: ask sappystick before reusing the design.