

TXJ1
- Size
- 23 × 11 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 2
- Pads
- 16
- Tracks, vias
- 2, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Oct 2026
- Updated
- 30 Oct 2026
Overview
TXJ1 is an open-source printed circuit board by sappystick, from the sappystick/ARX repository on GitHub. It is a 2-layer board of 23 × 11 mm with 16 parts on 2 nets, routed with 2 tracks and 0 vias.
README
README.mdArx: PHI-FOLD 233 detector head (design repo)
Everything from the engineering sessions in one place: parametric CAD generators, PCB tooling, simulations, verified results, documents, ready-made prompts and Claude Code / Cowork configuration.
Quick start (Claude Code or a plain terminal)
pip install -r requirements.txt
make setup
make verify-quick # about 3 minutes: v5 cylinder + base plate + parts + 47 checks + transmit-stage and field simulation
python3 tests/regress.pymake verify-full (incl. make audit-system: wiring audit, stress table, stack-up, voxel interference) adds the receiver simulations, hood, yoke and the display-board routing and Gerbers. Then paste prompts/P00_BOOTSTRAP_CLAUDE_CODE.md into Claude Code.
What is where
- docs/: DESIGN_STATE (current design), CORRECTIONS (what was wrong), ASSUMPTIONS, OPEN_ITEMS, PROCESS, CONVENTIONS, HISTORY, figures, reference photos.
- prompts/: P00-P10 for Claude Code (the next engineering tasks), prompts/cowork/C00-C06 for Cowork.
- .claude/: slash commands (/status /verify /newpart /route /release), skills, subagents, settings. CLAUDE.md at the root is the project memory.
- src/: generators and simulations (current) + archive/. data/: seeds, legacy boards, results, Gerbers. stl/: curated final STLs with hashes (formers are generated:
make formers-print). - scripts/push_to_github.sh: publish to GitHub yourself (plain git; STLs are ordinary binary files, all under GitHub's 100 MB limit).
Honest scope
Nothing here has been printed, wound, assembled or measured. Performance numbers are modeled from stated assumptions. SB1R-QA/QB, LB1 and CB1D now have KiCad files and Gerbers that pass the repo's own checks and independent DRC; none has been opened in KiCad or a CAM viewer. The rigid-flex spine, CAM/KiCad verification and the DSP are open; the upper assembly (S-stem, trigger, battery dock, twin-cavity shaft) is generated and checked on its meshes but not printed (docs/OPEN_ITEMS.md, docs/design/UPPER_ASSEMBLY_v1.md).
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | — | TXJ1:PTH | A1, A2, A3, A4, A5, A6, A12, B1, B2, B3, B4, B5, B6, B12, TAPA, TAPB |
More from sappystick/ARX
11- 4 layers78 × 77.2 mm

- 4 layers70 × 70 mm

- 6 layers

- 4 layers28 × 224 mm

- 6 layers

- 4 layers70 × 70 mm

- 4 layers28 × 136 mm

- 4 layers28 × 70 mm

- 4 layers24 × 60 mm

- 4 layers24 × 38 mm

- 4 layers230 × 228 mm

Similar boards
- 2 layers140.5 × 30 mm

Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0 - 2 layers41.4 × 14.5 mm

U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm

Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm

V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm

Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm

Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915 - 2 layers60 × 40 mm

- 2 layers21.1 × 26.9 mm

Questions
How big is the TXJ1 PCB?
It measures 23 × 11 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TXJ1 use?
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TXJ1 KiCad files?
From the sappystick/ARX repository on GitHub, at the commit this page was made from: the board is data/kicad/TXJ1.kicad_pcb and its schematic data/kicad/sch/PF233-AB1A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TXJ1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask sappystick before reusing the design.