
IMU Circuit 26-27
jonbackflip/IMU-PCB-for-UofA-BAJA-26-27
A board containing the attitude and heading sensor (IMU) for the UofA BAJA's car. CAN circuitry contained on board alongside an Arduino Nano for UART communication to the IMU.

design of front pcb for ebaja
Front pcb is an open-source printed circuit board by sanoopsivanandan, from the sanoopsivanandan/ebaja_front_pcb_design repository on GitHub. It is a 2-layer board of 71.6 × 66.6 mm with 57 parts on 70 nets, routed with 478 tracks and 32 vias.
It is built around the 74LVC125AD, TJA1050DRG and MSD-4-A, with the MCP2515-I among its other parts. Its parts include 29 resistors, 12 connectors, 9 capacitors, 4 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
design of front pcb for ebaja
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100 | Resistor_SMD:R_1210_3225Metric | R2, R4, R7, R8, R11, R12, R13, R14, R15, R16, R25 |
| 11 | 10k | Resistor_SMD:R_1210_3225Metric | R1, R3, R5, R6, R9, R10, R17, R18, R19, R20, R24 |
| 4 | 3.3k | Resistor_SMD:R_0603_1608Metric | R26, R27, R28, R29 |
| 3 | Conn_01x02_Socket | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1, J2, J5 |
| 3 | Conn_01x03_Socket | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4, J7, J9 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C8 |
| 2 | 22mf | Capacitor_SMD:C_1210_3225Metric | C2, C3 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | Header 2 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | P2, P4 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 10uF/16V | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U | C4 |
| 1 | 12-5V BUCK | footprint_front_pcb:mini_buck_green_mp1584 | U1 |
| 1 | 120Ω | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 1kΩ | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 470uf | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 74LVC125AD | footprint_front_pcb:SOIC127P600X175-14N | U4 |
| 1 | 8MHz | Crystal:Crystal_HC18-U_Vertical | X1 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x04_Socket | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | Conn_01x08_Pin | Connector_JST:JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical | J3 |
| 1 | Conn_01x08_Socket | Connector_JST:JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical | J8 |
| 1 | MCP2515-I | footprint_front_pcb:SOIC127P1030X265-18N(mcp2515) | U2 |
| 1 | MSD-4-A | footprint_front_pcb:CUI_MSD-4-A(sd card) | J10 |
| 1 | TJA1050DRG | footprint_front_pcb:TJA1050_SOT96-1 | U3 |
| 1 | pow_LED | LED_SMD:LED_0603_1608Metric | D1 |

jonbackflip/IMU-PCB-for-UofA-BAJA-26-27
A board containing the attitude and heading sensor (IMU) for the UofA BAJA's car. CAN circuitry contained on board alongside an Arduino Nano for UART communication to the IMU.




Tufts-SEDS-Rocketry/TR4-Kindlevan
The code repository for everything related to to the TR4 Kindlevin rocket including code for the flight computer, airbrakes and the rocket tracking antenna.


CU-Rocketry/flight_computer
Competition Flight Computer Module 25-26

It measures 71.6 × 66.6 mm and has 2 copper layers, 1.6 mm thick.
57 parts, built around the 74LVC125AD, TJA1050DRG, MSD-4-A and MCP2515-I. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sanoopsivanandan/ebaja_front_pcb_design repository on GitHub, at the commit this page was made from: the board is front_pcb.kicad_pcb and its schematic front_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sanoopsivanandan before reusing the design.