

Converter 1
12V to 3V DC-DC converter PCB design
- Size
- 83.8 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 4
- Pads
- 19
- Tracks, vias
- 38, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Feb 2025
- Updated
- 25 Feb 2025
Overview
Converter 1 is an open-source printed circuit board by Sanjeeviram07, from the Sanjeeviram07/DC-DC-convertor repository on GitHub. It is a 2-layer board of 83.8 × 17.8 mm with 8 parts on 4 nets, routed with 38 tracks and 0 vias.
It is built around the AMS1117-3.3 and L7805. Its parts include 4 capacitors, 2 ICs and 2 connectors.
Main components
2AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Screw_Terminal_01x02 | Terminal_block:TE_282837-2 | J1, J2 |
| 1 | 0.1uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 0.33uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 22uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | L7805 | L7805_5v:TO255P1040X460X1968-3 | U1 |
Similar boards
- 2 layers120 × 90 mm

- 2 layers84.3 × 56.9 mm

Ebus
piwko28/smart-home-ebus-adapter
eBUS adapter PCB for use with ebusd-esp firmware as well as with other UART devices.
51 parts18GPL-3.0 - 2 layers90.9 × 38.4 mm

Snaaur v1
duongngochoan/Self_balancing_robot_PID
Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.
58 parts7 - 2 layers67.3 × 74.5 mm

- 2 layers

- 2 layers99.1 × 33.5 mm

- 4 layers96 × 96 mm

- 2 layers45 × 45 mm

AVR FLIGHT CONTROLLER
syeedameen/miniflight
Budget Flight Controller for Drones with ATmega328P Microcontroller
65 parts2GPL-3.0
Questions
How big is the Converter 1 PCB?
It measures 83.8 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Converter 1 use?
8 parts, built around the AMS1117-3.3 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Converter 1 KiCad files?
From the Sanjeeviram07/DC-DC-convertor repository on GitHub, at the commit this page was made from: the board is converter_1.kicad_pcb and its schematic converter_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Converter 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sanjeeviram07 before reusing the design.