2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers
Old Clock V2.0 ===================== Controller board for Odl train station clock
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 9
- Pads
- 20
- Tracks, vias
- 32, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Feb 2018
- Updated
- 6 Sep 2026
Overview
Led is an open-source printed circuit board by sandroxGH, from the sandroxGH/OldClock-V2 repository on GitHub. It is a 2-layer board with 10 parts on 9 nets, routed with 32 tracks and 0 vias.
Its parts include 9 diodes and 1 resistor.
README
README.mdOld Clock V2.0
Controller board for Odl train station clock
Project preview
License and copyright
Copyright 2017-2018 sandroxGH infomsystemsrl@gmail.com
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | LED | Diodes_SMD:3528 | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 1 | R | Resistors_SMD:R_1210_HandSoldering | R1 |
Questions
What parts does the Led use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led KiCad files?
From the sandroxGH/OldClock-V2 repository on GitHub, at the commit this page was made from: the board is KiCad/Barra-Led/Led.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led design in my own project?
Its repository states no licence, so its author keeps all rights: ask sandroxGH before reusing the design.
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0