

ACtoDC pcblayout
- Size
- 97 × 52.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 7
- Pads
- 28
- Tracks, vias
- 39, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Apr 2026
- Updated
- 29 Apr 2026
Overview
ACtoDC pcblayout is an open-source printed circuit board by sandhya-na, from the sandhya-na/PCB-projects repository on GitHub. It is a 2-layer board of 97 × 52.5 mm with 14 parts on 7 nets, routed with 39 tracks and 0 vias.
Its parts include 5 diodes, 3 capacitors, 2 connectors, 1 resistor and 1 IC.
README
README.mdPCB Design Portfolio
This repository contains my original hardware designs developed in KiCad 10. These projects focus on power regulation and PCB layout best practices, including thermal management and signal integrity.
1. 12V AC to 5V DC Linear Power Supply
This project is a regulated power supply designed to convert 12V AC input into a stable 5V DC output.
Technical Design Details
* Rectification Stage:
Uses a full-bridge rectifier consisting of four 1N4007 diodes to convert the AC input to pulsating DC.
* Regulation:
Features an LM7805 linear regulator in a TO-220 package to provide a constant 5V output.
* Filtering System:
- A large 1000µF electrolytic capacitor (C1) is used for bulk smoothing of the rectified AC ripple.
- 0.1µF ceramic capacitors (C2, C3) are placed close to the regulator pins to filter out high-frequency noise.
* Circuit Protection:
Includes an input fuse (F1) to protect the components from overcurrent or short-circuit conditions.
* Visual Indication:
An on-board LED with a 2.2kΩ resistor provides immediate status of the output power.PCB Layout Strategy
The layout focuses on safety and stability. I prioritized proper spacing between the AC input terminals and the DC output to prevent interference and ensured the LM7805 has enough space for heat dissipation.
2. Adjustable DC-DC Buck Converter
This project is a high-efficiency switching regulator based on the LM2596-ADJ IC, used for stepping down DC voltages.
Technical Design Details
* Switching Regulator:
Powered by the LM2596S-ADJ, which operates at a switching frequency of 150kHz for high efficiency.
* Adjustable Output:
Uses a 10kΩ potentiometer (RV1) in the feedback loop, allowing the user to precisely set the desired output voltage.
* Power Components :
- A 47µH inductor (L1) and a Schottky diode (D2) are used for energy storage and current steering during the switching cycle. - Features a 100µF input cap and a 220µF output cap to stabilize the switching waveforms.
* Indication:
Includes a power-on LED with a 4.7kΩ resistor.PCB Layout Strategy
For this layout, I focused on Power Integrity:
- Wide Copper Pours: I used large copper areas for the VIN and VOUT nets to handle higher currents without overheating the traces.
- Switching Loop : I placed the diode, inductor, and IC as close together as possible to minimize the loop area, which helps reduce EMI (Electro-Magnetic Interference).
- Ground Plane: A solid ground reference was used to ensure low-noise operation of the feedback pin.
Tools & Methodology
* Software: KiCad 10.0
* Process : Schematic Capture → Footprint Assignment → PCB Routing → 3D Visualization → PDF Documentation.
Contact: sandhyana384@gmail.com
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 2 | 0.1uf | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2, C3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2 |
| 1 | 1000uF | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C1 |
| 1 | 2.2K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | LED | LED_THT:LED_D5.0mm | D5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
The 13 most common of 14 parts.
More from sandhya-na/PCB-projects
1- 2 layers43 × 21 mm

Similar boards
- 2 layers116.8 × 30 mm

Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm

- 2 layers34 × 45 mm

2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm

- 2 layers45.3 × 42.7 mm

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm

- 2 layers62 × 24 mm

Questions
How big is the ACtoDC pcblayout PCB?
It measures 97 × 52.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ACtoDC pcblayout use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ACtoDC pcblayout KiCad files?
From the sandhya-na/PCB-projects repository on GitHub, at the commit this page was made from: the board is ACtoDC_converter/ACtoDC_pcblayout.kicad_pcb and its schematic ACtoDC_converter/ACtoDC_schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ACtoDC pcblayout design in my own project?
Its repository states no licence, so its author keeps all rights: ask sandhya-na before reusing the design.