
CombinedLEDdriverMAX278
williamlin108/Olympus-BH-2-LED-Module-G031xMAX20078
Smart Microscope LED Driver based on STM32G431

open-source wireless gaming mouse (nRF52 + PAW3395)
Nrf52820 hiiri is an open-source printed circuit board by samuwall, from the samuwall/hiiri-v1 repository on GitHub. It is a 2-layer board of 34.2 × 31.3 mm with 46 parts on 53 nets, routed with 420 tracks and 66 vias.
It is built around the PAW3395DM-T6QU, CL4064M6F and D2F-01F. Its parts include 22 capacitors, 10 resistors, 3 ICs, 3 connectors and 3 switches. It belongs with the nRF52 and nRF5x boards of this library.
mouse: nRF52820 + PAW3395 + SPDT L/R + EC10E
dongle: nRF52840
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C13, C19, C21, C23 |
| 5 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C9, C18 |
| 3 | 0R | Resistor_SMD:R_0201_0603Metric | R8, R9, R10 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C20, C22 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C5, C11 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | D2F-01F | custom:SW_D2F-01F_OMR | SW1, SW2 |
| 1 | 1.2p | Capacitor_SMD:C_0201_0603Metric | C14 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1p | Capacitor_SMD:C_0201_0603Metric | C15 |
| 1 | 2.2n | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | 20K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 32MHz | custom:Crystal_SMD_1612-4Pin_1.6x1.2mm | X1 |
| 1 | 33u | Capacitor_SMD:C_0805_2012Metric | C24 |
| 1 | 4.7R | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 4.7n | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 820p | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | CL4064M6F | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2 |
| 1 | EC10E | custom:RotaryEncoder_Alps_EC10E-Switch | SW3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LiPo_JST_Conn | custom:1x02_PTH | J2 |
| 1 | PAW3395DM-T6QU | custom:PIXART_SENSOR_Offset_16-PDIP | U3 |
| 1 | USB_C_USB20 | custom:USB_C_Receptacle_GT-USB-7025 | J1 |
| 1 | chip_ant | custom:5x3mm_Chip_Ant_Layout_Mirrored | AE1 |
| 1 | debug_pads | custom:1x4_0.7mm_1.27mm_Test_Pads | J3 |
| 1 | nRF52820-QDxx | custom:QFN-40-1EP_5x5mm_P0.4mm_0.2mm_PAD | U1 |

williamlin108/Olympus-BH-2-LED-Module-G031xMAX20078
Smart Microscope LED Driver based on STM32G431


geoffgun15/openmice
Custom PAW3395 wireless mouse and receiver PCBs, firmware, and web configurator.

lordor5/Mouse
A custom, high-performance wireless mouse project featuring custom PCB design, high-end optical sensors, and Hall effect switches.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

It measures 34.2 × 31.3 mm and has 2 copper layers, 1.56 mm thick.
46 parts, built around the PAW3395DM-T6QU, CL4064M6F and D2F-01F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the samuwall/hiiri-v1 repository on GitHub, at the commit this page was made from: the board is hw/mouse/kicad/nrf52820_hiiri.kicad_pcb and its schematic hw/mouse/kicad/nrf52820_hiiri.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask samuwall before reusing the design.