Skip to the content
2 layers141 × 67.6 mmXT60 CAN, the printed circuit board in 3D

my PCBS

Size
141 × 67.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
16
Pads
112
Tracks, vias
114, 60
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
27 Jan 2022
Updated
24 Aug 2022

Overview

XT60 CAN is an open-source printed circuit board by SamsonChau, from the SamsonChau/PCB repository on GitHub. It is a 2-layer board of 141 × 67.6 mm with 41 parts on 16 nets, routed with 114 tracks and 60 vias.

It is built around the MP1584EN, SMBJ12CA and SMBJ24CA. Its parts include 12 connectors, 8 fuses, 7 diodes, 6 capacitors and 3 resistors.

Main components

3

README

README.md

PCB

my PCBS

Parts

41
QtyValueFootprintReferences
83557-2PolyuRobotics:FUSE_3557-2F1, F2, F3, F4, F5, F6, F7, F8
350v 47uFCapacitor_SMD:C_Elec_6.3x7.7C4, C5, C6
3MP1584PolyuRobotics:DC-DC-mp1584_moduleU1, U2, U3
2+12vTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ5, J10
2+5vTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ3, J6
2+9vTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ4, J7
2LOGOPolyuRobotics:Club_logoG***, G***
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
110v 100uFCapacitor_SMD:C_Elec_5x5.4C1
112v_ledLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD7
116v 220uFCapacitor_SMD:C_Elec_6.3x7.7C2
122kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
125v 100uFCapacitor_SMD:C_Elec_6.3x7.7C3
133kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
15v_ledLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD5
19v_ledLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD6
1SMBJ12CADiode_SMD:D_SMBD3
1SMBJ24CADiode_SMD:D_SMBD4
1SMBJ5CADiode_SMD:D_SMBD1
1SMBJ9CADiode_SMD:D_SMBD2
1XT60_CH1Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_VerticalJ2
1XT60_CH2Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_VerticalJ8
1XT60_CH3Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_VerticalJ9
1XT60_CH4Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_VerticalJ15
1XT60_CH5Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_VerticalJ16
1XT60_INConnector_AMASS:AMASS_XT60-M_1x02_P7.20mm_VerticalJ1

More from SamsonChau/PCB

12

Similar boards

  • 2 layers75.2 × 83.6 mmShield, the printed circuit board in 3D

    Shield

    BlackJackMC/LineTracing

    25 parts
  • 4 layers53 × 33 mmLiPo BuckBoost Charger, the printed circuit board in 3D

    LiPo BuckBoost Charger

    potpurri/LiPo_Charger_TP4056_BuckBoost_TPS63020

    This PCB is designed to safely charge a lithium-ion cell and provide a selectable 3.3V or 5V output. It's equipped with components that ensure safe charging and protection for the battery and supports flexible output…

    63 parts9Apache-2.0
  • 4 layers100 × 100 mmPCB Design, the printed circuit board in 3D

    PCB Design

    ConquerToFreedom/SwasthEdge

    Low-cost self-diagnosing edge controller for industrial sensor reliability

    89 parts2
  • 4 layers102.4 × 83.1 mmPLC4UNI, the printed circuit board in 3D

    PLC4UNI

    0sirys/Juan_Pimentel_Electiva_2026_C2

    209 partsMIT
  • 4 layers102.2 × 83 mmZorionx nivara, the printed circuit board in 3D

    Zorionx nivara

    BRYANSFM/Bryan_Fernandez_ELECTIVA_2025_C2

    132 parts
  • 2 layers122.2 × 99.6 mmDatalogger, the printed circuit board in 3D

    Datalogger

    dhruvp05/Datalogger-PCB

    80 parts
  • 4 layers144 × 112 mmQuadcuber, the printed circuit board in 3D

    Quadcuber

    gonewx/quadcuber

    本目录是 A1 电子源目录。打开 quadcuber.kicadpro,包含原生可编辑原理图和四层 PCB、本地符号/封装库。本设计为单块PCB,RP2040、QSPI Flash、晶振、USB-C、驱动和电源均直接焊接在板上;A0的Pico H插装已移除。马达使用EV3裸插座。接线定义仍从 ../wiring/spec.py 导入,固件未改动,也没有把 R/L 固件描述成已支持四臂控制。

    200 parts
  • 2 layers102.1 × 82.7 mmPLC Electiva, the printed circuit board in 3D

    PLC Electiva

    JosueHerrera05/Josue_Herrera_Electiva_2026_C2

    Repositorio Electíva Diseño Mecatrónico 2026-C2

    198 partsMIT

Questions

How big is the XT60 CAN PCB?

It measures 141 × 67.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the XT60 CAN use?

41 parts, built around the MP1584EN, SMBJ12CA and SMBJ24CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the XT60 CAN KiCad files?

From the SamsonChau/PCB repository on GitHub, at the commit this page was made from: the board is XT60_CAN/XT60_CAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the XT60 CAN design in my own project?

Its repository states no licence, so its author keeps all rights: ask SamsonChau before reusing the design.