2 layers99.7 × 74.8 mm
2 layers99.7 × 74.2 mm
Split steno left
samlli/Split-Steno2Split Stenographic Keyboard
- Size
- 99.7 × 74.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 41
- Pads
- 261
- Tracks, vias
- 527, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Mar 2018
- Updated
- 13 Sep 2018
Overview
Split steno left is an open-source printed circuit board by samlli, from the samlli/Split-Steno repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.7 × 74.2 mm with 44 parts on 41 nets, routed with 527 tracks and 0 vias.
It is built around the TC2030-IDC-NL. Its parts include 20 switches, 7 connectors, 5 capacitors, 2 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
rev2.0/README.mdrev2.0
WARNING: INCOMPLETE/ABANDONED
Reason: big forehead, decided to scrap and proceed with 2.1
Features:
Integrated ATxmega controller
SMD only
No Diodes
Reversible PCB
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | SW_Push | lib_fp:MX-1U-NoLED | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 +2 |
| 6 | MountingHole_2.2mm_M2 | lib_fp:MountingHole_2.2mm_M2 | M2, M2, M2, M2, M2, M2 |
| 4 | 0.1uF | lib_fp:C_0603_HandSoldering | C2, C3, C4, C5 |
| 2 | 4.7k | lib_fp:R_0603_HandSoldering | R1, R2 |
| 2 | Conn_01x03 | lib_fp:Pin_Header_Straight_1x03_Pitch2.54mm | J4, J5 |
| 2 | SW_Push | lib_fp:MX-2U-NoLED | SW19, SW20 |
| 1 | 10uF | lib_fp:C_0603_HandSoldering | C1 |
| 1 | ATXMEGA-A4U-EPAD | lib_fp:TQFP-44_10x10mm_Pitch0.8mm | U2 |
| 1 | Audio-Jack-4 | lib_fp:TRRS-PJ-320A | J2 |
| 1 | Conn_01x02 | lib_fp:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | Conn_02x04_Odd_Even | lib_fp:Pin_Header_Straight_2x04_Pitch2.54mm | J3 |
| 1 | Fuse | lib_fp:Fuse_SMD1206_HandSoldering | F1 |
| 1 | LOGO | lib_fp:airi_icon-7.6 | G*** |
| 1 | MIC550X | lib_fp:SOT-23-5_HandSoldering | U1 |
| 1 | TC2030-IDC | lib_fp:TC2030-NL_SMALL_AND_IDC_PDI | P1 |
| 1 | USB_B | lib_fp:USB_miniB_hirose_5S8 | J1 |
Questions
How big is the Split steno left PCB?
It measures 99.7 × 74.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Split steno left use?
44 parts, built around the TC2030-IDC-NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Split steno left KiCad files?
From the samlli/Split-Steno repository on GitHub, at the commit this page was made from: the board is rev3.0/split_steno_left.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Split steno left design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from samlli/Split-Steno
3- 2 layers99.7 × 74.2 mm
- 2 layers99 × 88 mm
Similar boards
- 4 layers56.5 × 99.8 mm
BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
147 parts432CERN-OHL-S-2.0 - 2 layers
- 4 layers84.5 × 129.5 mm
- 2 layers109 × 71 mm
- 4 layers72.6 × 170 mm
OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 6 layers65 × 112 mm
BitaxeGT
bitaxeorg/BitaxeGT
Bitaxe Gamma Turbo 2x BM1370 ASIC ESP32 powered Bitcoin miner
187 parts70CERN-OHL-S-2.0 - 8 layers38.5 × 38.5 mm
Flight Controller
rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!
133 parts57MIT - 2 layers178.6 × 99.4 mm
Quefrency right-65
keebio/quefrency-rev1-pcb
Quefrency Rev. 1 Keyboard PCB =============================
162 parts45MIT