4 layers46.4 × 99.8 mm
Trimix Analyzer
magnus188/aegir
Open-source ESP32-P4 trimix analyzer prototype for technical diving,
171 parts14
2 layers106.7 × 38.1 mm
Scorbot Simple Breakout Board
SamirChamanSerna/Scorboter-ER-5-Plus_Controller1Scorboter-ER 5 Plus Controller
- Size
- 106.7 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 39
- Pads
- 84
- Tracks, vias
- 263, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Sep 2023
- Updated
- 11 Feb 2024
Overview
Scorbot Simple Breakout Board is an open-source printed circuit board by SamirChamanSerna, from the SamirChamanSerna/Scorboter-ER-5-Plus_Controller repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 106.7 × 38.1 mm with 15 parts on 39 nets, routed with 263 tracks and 0 vias.
It is built around the M20-9990246. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
1README
README.mdScorboter-ER-5-Plus_Controller
Scorboter-ER 5 Plus Controller ⚠️Development has been halted⚠️
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | M20-9990246 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | 5vPower, M1, M2, M3, M4, M5, M6 |
| 6 | 61300311121 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | e&sw1, e&sw2, e&sw3, e&sw4, e&sw5, e&sw6 |
| 1 | DB-50 | SnapEDA:AMPHENOL_DD50S564TLF | J1 |
The 14 most common of 15 parts.
Questions
How big is the Scorbot Simple Breakout Board PCB?
It measures 106.7 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Scorbot Simple Breakout Board use?
15 parts, built around the M20-9990246. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scorbot Simple Breakout Board KiCad files?
From the SamirChamanSerna/Scorboter-ER-5-Plus_Controller repository on GitHub, at the commit this page was made from: the board is PCB/Scorbot Simple Breakout Board/Scorbot Simple Breakout Board.kicad_pcb and its schematic PCB/Scorbot Simple Breakout Board/Scorbot Simple Breakout Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scorbot Simple Breakout Board design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers65 × 39.1 mm
BB SPEM A-1 Breakout
botblox/SPEBlox-Module-Documentation
Design files associated with SPEBlox Module for Design Integration
17 parts2MIT - 4 layers81 × 80 mm
Breakout
nischayhegde/jetson_spi_to_can_x8_breakout
A PCB board for expanding the SPI channels on Jetson Orin nano super into 8 CANfd channels. Comes with chip select logic and jetpack drivers. Supports 1Mbit per CAN channel.
145 parts1 - 2 layers102 × 45 mm
HELPStat V2
stevfu/eis_capstone
Utilization of Electrochemical Impedance Spectroscopy for the Detection of Drugs
51 parts1MIT - 4 layers120.1 × 59.2 mm
TEACar motor controller
TEALab-UF/bldc_esc_pcb
This repo contains the KiCAD files of the schematic and PCB layout for the TEACar BLDC motor controller
145 parts1 - 2 layers64.6 × 48.5 mm
Elec327 finalproject
azhang2718/Inverted_Pendulum
This is a final project for ELEC 327. Our team members include Anthony Zhang, Bilin Yang, Brandon Sung, and Setsunna Jiang.
21 parts - 2 layers25.7 × 44.8 mm
TelemetryComputer
BerkeleyBikeBuilders/TelemetryComputer
FW and HW for full suspension telemetry data logger
23 partsApache-2.0 - 2 layers26.7 × 21.6 mm
Usb webcam interface
jkleiber/six-wheel-robot
Hardware development for a six wheel mobile robot
3 parts