

design of a 6 4wire fan control board that can independently control each fan individually by controlling the pwm output.
- Size
- 91 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 29
- Pads
- 143
- Tracks, vias
- 376, 32
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Apr 2026
- Updated
- 9 Apr 2026
Overview
Fancontrol is an open-source printed circuit board by salvinthomasthomas, from the salvinthomasthomas/fan-control-using-max31790 repository on GitHub. It is a 2-layer board of 91 × 52 mm with 37 parts on 29 nets, routed with 376 tracks and 32 vias.
It is built around the MAX31790ATI+T. Its parts include 19 resistors, 8 connectors, 5 ICs, 4 capacitors and 1 inductor.
Main components
1README
README.mdfan-control-using-max31790
design of a 6, 4wire fan control board that can independently control each fan individually by controlling the pwm output.
📌 Overview
This project is a Smart Fan Control System designed to monitor and control multiple fans using embedded hardware. It supports real-time speed control, fault detection, and communication with a host system.
The system is ideal for applications like:
Server cooling systems PC fan hubs Industrial ventilation systems 🚀 Features 🔄 Multi-Fan Control (Supports multiple PWM fans) ⚡ Dynamic Speed Adjustment 🌡️ Temperature-Based Control (Optional) ⚠️ Fan Fault Detection (FanFail Monitoring) 📡 I2C Communication Interface 🧠 Microcontroller-Based Smart Control (Optional) 🔌 12V Input with 5V/3.3V Regulation Hardware Components Microcontroller (e.g., STM32F103C8T6) Fan Controller IC (e.g., MAX31790) PWM Fans (4-pin) Power Supply (12V input) Buck Converter (12V → 5V / 3.3V) Pull-up Resistors (for I2C, PWM, TACH)
code for the stm32 is not available
for the simulation part open the project in pspice and run the simulation in transient mode
SCHEMATIC IMAGE FOR REFERENCE
PCB LAYOUT FOR REFERENCE
3D VIEW FOR REFERENCE
SIMULATION FOR PSPICE
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 4.7kOhm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R3, R4, R5, R6, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 7 | 22053041 | footprints:CONN_A-7478-04A_MOL | J2, J3, J4, J5, J6, J7, J8 |
| 2 | 10kOhm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2, R19 |
| 2 | 2kOhm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R7, R8 |
| 2 | TMP102xxDRL | Package_TO_SOT_SMD:SOT-563 | U3, U5 |
| 1 | 0.001uF | Capacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 | C9 |
| 1 | 100nF | Capacitor_THT:C_Radial_D12.5mm_H20.0mm_P5.00mm | C2 |
| 1 | 10uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1 |
| 1 | 3.3uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 33.2kOhm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
| 1 | 47uF | Capacitor_THT:C_Radial_D12.5mm_H20.0mm_P5.00mm | C3 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | MAX31790ATI_ | MAX31790ATI_:QFN40P400X400X80-29N | U2 |
| 1 | NPC45560-H | Package_DFN_QFN:DFN-12-1EP_3x3mm_P0.5mm_EP2.05x2.86mm | U1 |
| 1 | TPS561208DDCT | KiCADv6 v2:SOT95P280X110-6N | U4 |
Similar boards
- 2 layers40 × 34 mm

- 2 layers53.9 × 23.2 mm

Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
37 parts1kGPL-3.0 - 2 layers52 × 51.8 mm

Esp32-homeassistant rf bridge
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
37 parts915 - 2 layers87.8 × 59.8 mm

FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers65 × 28 mm

BMS Cell Module
stuartpittaway/diyBMS
Do it yourself battery management system for Lithium ion battery packs/cells
37 parts676GPL-3.0 - 2 layers48 × 32 mm

FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
37 parts575GPL-2.0 - 2 layers38.1 × 153.7 mm

- 2 layers47.8 × 27.4 mm

Vsf stm32h7b0
vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
37 parts341Apache-2.0
Questions
How big is the Fancontrol PCB?
It measures 91 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fancontrol use?
37 parts, built around the MAX31790ATI+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fancontrol KiCad files?
From the salvinthomasthomas/fan-control-using-max31790 repository on GitHub, at the commit this page was made from: the board is fancontrol/fancontrol.kicad_pcb and its schematic fancontrol/fancontrol.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fancontrol design in my own project?
Its repository states no licence, so its author keeps all rights: ask salvinthomasthomas before reusing the design.