Skip to the content
4 layers100.6 × 101.6 mmClassThingy, the printed circuit board in 3D

I'm a nerd

Size
100.6 × 101.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
7
Nets
39
Pads
72
Tracks, vias
73, 70
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Sep 2025
Updated
22 Jul 2026

Overview

ClassThingy is an open-source printed circuit board by SaltyMelonYT, from the SaltyMelonYT/PCB-Projects repository on GitHub, published under the MIT licence. It is a 4-layer board of 100.6 × 101.6 mm with 7 parts on 39 nets, routed with 73 tracks and 70 vias.

It is built around the ARDUINO UNO R3 and BC547. Its parts include 2 connectors, 1 resistor and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

I'm a nerd

Incase that wasn't obvious haha. Here is a repository of a bunch of PCB's I've made, from a heart lightboard for your lover (It works) to lampnodes that connect to a central server!

Parts

7
QtyValueFootprintReferences
1+9VBattery:BatteryHolder_Eagle_12BH611-GRBT1
11kResistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolderR1
1Arduino_UNO_R3Module:Arduino_UNO_R3A1
1BC547Package_TO_SOT_THT:TO-92_InlineQ1
1Conn_01x02Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_VerticalJ1
1Conn_01x08_PinConnector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_VerticalJ2
1WC1602ADisplay:WC1602ADS1

More from SaltyMelonYT/PCB-Projects

12

Similar boards

  • 2 layers170.2 × 119.4 mmSentinel, the printed circuit board in 3D

    Sentinel

    YousefAliAicha/sentinel-arduino-firmware

    Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.

    25 parts2MIT
  • 2 layersDemo, the printed circuit board in 3D

    Demo

    ram-kumar-shrestha/minor-project

    31 parts1
  • 2 layers98.1 × 101.3 mmClimatecontrolpcb, the printed circuit board in 3D

    Climatecontrolpcb

    Sharan21-cmd/climate-control-pcb-design

    A compact and efficient Climate Control PCB designed for monitoring and regulating temperature and humidity using embedded electronics.

    16 parts1
  • 2 layers162 × 100 mmCurve tracer, the printed circuit board in 3D

    Curve tracer

    Divyansh12-86/semiconductor-parameter-daq-bench

    An Arduino UNO R4-based automated I–V curve tracer for semiconductor characterization. Uses programmable gate and drain drive, an ADS1115 ADC, and switched 10 Ω/1 kΩ current-sensing ranges to measure MOSFET…

    24 parts
  • 2 layers89 × 110 mmPPS, the printed circuit board in 3D

    PPS

    GCA-ROBOTICA/Simulador-ECU-Tablero

    El sistema permite interoperar con un tablero diseñado originalmente para señales analógicas y discretas, emulando una arquitectura moderna basada en CAN Bus, similar a la utilizada en vehículos actuales.

    17 partsGPL-3.0
  • 2 layersMcuwith3subsheet, the printed circuit board in 3D

    Mcuwith3subsheet

    karthikkrishnaa/Internship1_PCB_files

    Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

    40 parts
  • 2 layers134 × 135.5 mmMjp10, the printed circuit board in 3D

    Mjp10

    meghashreejpbhat-hue/PCB-Design-KiCad

    A collection of PCB design mini-projects completed using KiCad as part of my Value Added Course on PCB Design.

    35 parts
  • 2 layers95.2 × 63.7 mmOpentribhw, the printed circuit board in 3D

    Opentribhw

    nurbano/opentribhw

    Este proyecto presenta una plataforma abierta y de bajo costo para la instrumentación, medición y control en ensayos tribológicos de tipo Pin-on-Disk y Block-on-Ring.

    38 parts

Questions

How big is the ClassThingy PCB?

It measures 100.6 × 101.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ClassThingy use?

7 parts, built around the ARDUINO UNO R3 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ClassThingy KiCad files?

From the SaltyMelonYT/PCB-Projects repository on GitHub, at the commit this page was made from: the board is classThingy/hardware/hardware.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ClassThingy design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).